Philips HB172/01 User Manual page 8

EnglisH
8
Duration of the
tanning session in
minutes
2nd session
3rd session
4th session
5th session
6th session
7th session
8th session
9th session
10th session
using the appliance
1 Place the appliance on a solid, flat and stable surface.
The appliance can be placed in two positions: upright and tilted. (Fig. 1)
,
 Put the plug in the wall socket.
 Consult the table in these instructions for use to determine the appropriate duration of the
session.
4 Put on the protective goggles supplied.
5 Set the timer to the appropriate tanning time. (Fig. )
6 Position yourself in front of the face tanner.
The distance between your face and the tanning lamps should be 10 cm. (Fig. )
,
When the set time has elapsed, the timer will automatically switch off the appliance.
 Always unplug the appliance after use.
8 Keep track of the overall number of sessions you have had on a piece of paper or by means
of the memory knobs (type HB15 only).
protective goggles
The protective goggles should only be used when tanning with a Philips tanning appliance. They
should not be used for other purposes.
The protective goggles comply with protection class II according to directive 89/686/EEC.
cleaning
Always unplug the appliance and let it cool down before cleaning it.
You can clean the outside of the appliance with a damp cloth. Make sure that no water runs
,
into the appliance.
Never use scouring pads and abrasive liquids such as scouring agents, petrol or acetone to clean
the appliance.
1 Clean the protective goggles with a moist cloth.
for persons with very
sensitive skin
10-15
10-15
10-15
10-15
10-15
10-15
10-15
10-15
10-15
for persons with
normal sensitive skin
20-25
20-25
20-25
20-25
20-25
20-25
20-25
20-25
20-25
for persons with less
sensitive skin
30-40
30-40
30-40
30-40
30-40
30-40
30-40
30-40
30-40