Table of Contents
Advertisement
EMERGENCY STOP BUTTON ON
HULL UNIT
The EMERGENCY STOP button on the hull unit stops the raising or lowering of the transducer in
case of an emergency. The transducer stops moving when the button is operated, a warning mes-
sage appears and the transducer cannot be raised or lowered. The transducer is also stopped
when the ratchet wrench in the hull unit, which is used to manually raise the transducer, is re-
moved from its holder.
To release the emergency stop condition, first confirm that no one is near the hull unit. Then do
the following:
• To release the EMERGENCY STOP button, turn the button in the direction of the arrow on the
button.
• Return the ratchet wrench to its holder.
iv
EMERGENCY STOP button
(default position)
Advertisement
Table of Contents
