Advertisement
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with
the user of the product for future reference.
BEFORE USE
You must inspect the product including its cable and plug
for any signs of damage. If the product is damaged, DO
NOT use it, and contact your supplier immediately.
INSTALLATION
A risk assessment should be carried out before
commencing work. Fix the luminaire with the brackets
provided. Fix each bracket to the end of the luminaire
using the thumbwheel bolt. Place the rubber washer
between the bracket and the end of the luminaire. The
luminaire may now be used free-standing on the floor, or
mounted to a wall or ceiling with screws through the
holes in the brackets.
If permanently installed, the luminaire must be installed
by a competent elecrician in accordance with the latest
IEE Wiring Regulations.
Either plug the lead into a 13 A socket, or remove the
13 A plug fitted, and wire directly to a fused spur, or
connect the luminaire to a switching unit such as the
NJ938.
The wires are colour-coded as follows:
• Brown = Live (phase)
• Blue = Neutral
• Green/Yellow = Earth
• The NJ164 must be earthed for safe and reliable
operation.
Page 2
Advertisement
