Specifications - Samson S com plus Owner's Manual

Specifications

System Specifications
Frequency Response
Dynamic range
THD
Crosstalk
Operating Level
Max. Input Level
CMRR
Max. Output Level
Balanced Input
Connectors
Impedance
Balanced Output
Connectors
Impedance
Key Input
Connector
Impedance
Max. Input Level
Key Output
Connector
Impedance
Max. Output Level
Expander/Gate
Trigger range
Attack
Release
Ratio
Compressor Section
Detector
Threshold
Ratio
Manual Attack Time
Manual Release Time
Output gain
Peak Limiter Section
Threshold
Ratio
Limiter
Attack
Release
De-Esser
Trigger range
Maximum
<10Hz to 20kHz +0 / -0.1 dB effect out, -0.4 @ 100kHz,
<10Hz to 20kHz +0 / -0.1 dB effect in, -3dB @ >100kHz
116 dB, un-weighted, 22 Hz to 22 kHz
0.008 % typ. @ +4 dBu, 1 kHz Effect out, 0.016% effect in
>20K Ohms balanced or unbalanced
60 Ohms balanced or unbalanced
Variable (Slow:100 ms / 1dB, Fast:100 ms / 100 dB)
Variable (0.3 ms / 20 dB to 300 ms / 20dB)
12dB Gain Reduction mid / high band
60
>100dB, 22 Hz to 22 kHz
Selectable +4dBu / -10 dBV
+21dBu, balanced
Min. 40dB, >50dB @ 1kHz
+21dBu, balanced
XLR and 1/4" TRS jack
XLR and 1/4" TRS jack
1/4" jack
10 k Ohm
+21 dBu
1/4" jack
47 Ohms
+21 dBu
Variable (Off to +10 dB)
<1 ms per 50 dB
Expander 1:2, Gate 1:16
RMS
-40 dB to +20 dB
Variable (1:1 to infinity : 1)
Variable (0.05 to 5 Sec)
Variable (-20 to +20 dB)
Variable 0 to Off
Preset
Ceiling type
<5 ms
Typ. 20dB/s
variable (off to 12dB)