Samson S-com plus Owner's Manual

Samson S-com plus Owner's Manual

Stereo compressor / limiter dynamics processor
Hide thumbs Also See for S-com plus:
Table of Contents

Advertisement

Available languages

Available languages

GAIN REDUCTION dB
30
27
24 21
18 15
12
9
6
4
2
1
EXPANDER/GATE
COMPRESSOR / LIMITER
TRIGGER
THRESHOLD
RATIO
ATTACK
-10
10
20
4:1
STEREO
GATE
KEY
COMPRESSOR
LISTEN
50
0
-30
+10
2
6
15
FAST
OFF +10
1
.3
-40
+20
dB
SLOW
dB
dB
RELEASE
SPECTRA
KEY
STEREO COMPRESSOR / LIMITER
INPUT / OUTPUT LEVEL dB
-30
-24
-18 -12
-6
-3
0
+3
+6
+9 +12 +18
CH 1
STEREO LINK
EXPANDER/GATE
RELEASE
OUTPUT
ENHANCER
TRIGGER
0
50
1
5
20
IN/OUT 1
200
.15
3
-10
+10
3
7
50
IN/OUT 2
300
.05
5
OFF
10
OFF +10
-20
+20
mSec
Sec
dB
dB
AUTO
I/O METER
GAIN REDUCTION dB
INPUT / OUTPUT LEVEL dB
30
27
24 21
18 15
12
9
6
4
2
1
-30
-24
-18 -12
-6
-3
0
+3
+6
+9 +12 +18
COMPRESSOR / LIMITER
THRESHOLD
RATIO
ATTACK
RELEASE
-10
10
4:1
50
1
GATE
GATE
KEY
LISTEN
0
-30
+10
2
6
15
200
.15
3
-10
FAST
1
.3
300
.05
5
-40
+20
SLOW
dB
dB
mSec
Sec
Sec
RELEASE
SPECTRA
KEY
AUTO
I/O METER
POWER
CH 2
CH 2
OUTPUT
ENHANCER
0
5
+10
3
7
OFF
10
-20
+20
dB

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S-com plus and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Samson S-com plus

  • Page 1 GAIN REDUCTION dB INPUT / OUTPUT LEVEL dB GAIN REDUCTION dB INPUT / OUTPUT LEVEL dB 24 21 18 15 -18 -12 +9 +12 +18 24 21 18 15 -18 -12 +9 +12 +18 POWER EXPANDER/GATE COMPRESSOR / LIMITER CH 1 STEREO LINK EXPANDER/GATE COMPRESSOR / LIMITER...
  • Page 2: Safety Instructions

    Safety Instructions Caution: To reduce the hazard of electrical CAUTION shock, do not remove cover or back. FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE FUSE ATTENTION No user serviceable parts inside. Please refer all UTILISER UN FUSIBLE DE servicing to qualified personnel.
  • Page 3: Table Of Contents

    Configurations du système 29-30 Conexiones de S•com plus Connexions du S•com Plus Especificaciones 60-61 Caractéristiques techniques 60-61 Copyright 2001, Samson Technologies Corp. Printed April, 2001 Samson Technologies Corp. 575 Underhill Blvd. P.O. Box 9031 Syosset, NY 11791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888...
  • Page 4: Forward By Ray Kennedy

    Now, we have finally arrived in an age of very high quality VCA's which are not too expensive and are allowing for very sophisticated and versatile designs, as are the S-Class units from Samson. Ray Kennedy...
  • Page 5: Introduction

    Samson products in the future. With proper care and adequate air circulation, your S•com plus will operate trouble free for many years.
  • Page 6: S•Com Plus Features

    ENHANCER AUTO I/O METER IN/OUT The Samson S com Plus dynamics processor utilizes the latest technology in gain management design. Here are some of its main features: • Full featured, dual channel dynamics processor including Compressor/Limiter, Expander/Gate, De-Esser and Peak Limiter.
  • Page 7: Controls And Functions

    Controls and Functions FRONT PANEL LAYOUT GAIN REDUCTION dB INPUT / OUTPUT LEVEL dB DE-ESSER LEVEL dB LIMIT 24 21 18 15 -18 -12 +9 +12 +18 STEREO LINK EXPANDER/GATE COMPRESSOR / LIMITER DE-ESSER CH 1 TRIGGER THRESHOLD RATIO ATTACK RELEASE OUTPUT LEVEL...
  • Page 8 Controls and Functions GAIN REDUCTION dB INPUT / OUTPUT LEVEL dB DE-ESSER LEVEL dB LIMIT 24 21 18 15 -18 -12 +9 +12 +18 POWER LINK CH 2 EXPANDER/GATE COMPRESSOR / LIMITER DE-ESSER TRIGGER THRESHOLD RATIO ATTACK RELEASE OUTPUT LEVEL LIMITER GATE OFF +10...
  • Page 9: Operating The S•Com Plus

    Operating The S•com plus Whether you are an experienced audio engineer, just starting out, or you just want to experiment, follow the steps below to get going. Further sections in this manual will cover basic dynamics and the associated parameters, sys- tem set-ups and applications for using dynamics processing in recording and live sound applications.
  • Page 10: Gating A Signal

    Operating The S•com plus • Now gradually turn down the THRESHOLD level and GAIN REDUCTION dB 24 21 18 15 listen for the compression. For a visual representation, the amount of compression is indicated on the GAIN ER/GATE COMP REDUCTION meter. THRESHOLD RATIO ATTAC...
  • Page 11: Using The Enhancer

    Operating The S•com plus USING THE ENHANCER The S•com plus’ ENHANCER switch can be engaged to activate the EFR (Enhanced Frequency Recovery) cir- cuit. By engaging the ENHANCER, the S•com plus EFR restores the high frequency content that can be lost when high gain reduction is applied.
  • Page 12: Dynamics Processing 101

    Dynamics Processing 101 To begin to understand dynamics processing, we must first understand what dynamics are. Dynamics, or the dynamic range of a signal or audio device, is the amount of level between the softest and loudest possible out- put. Dynamics processing is applied to a signal to manage the changes in level. Various types of processing units are available to control dynamics including Noise Gates, Expanders, Compressors, Limiters and De-Essers.
  • Page 13 Dynamics Processing 101 - Continued Soft-Knee / Hard-Knee In order to prevent harsh, unnatural envelopes on compressed signals sophisticated dynamics processors like the S•com plus feature an SKD (Smart Knee Detector) or automatic knee circuit. The Smart Knee Detector auto- matically switches from Soft-Knee when the signal is less than 10 dB over Threshold, to Hard-Knee when the sig- nal is 10db above Threshold.
  • Page 14: Applications

    Applications Using the Expander/Gate to Remove Hiss and Noise The S•com plus is an extremely useful tool in reducing the level of unwanted noises. By using the Expander/Gate you can effectively fade the noise into the noise floor or abruptly turn the unwanted signal completely off. Let’s say you want to reduce the bleed or cross talk that occurs when different instruments are recorded in close proximity to each other.
  • Page 15: Applications

    Applications Leveling a Vocal Track When recording a vocal track, the vocalist may change the distance between them and the microphone, or they may naturally have a lot of dynamic range in their performance. In either case, the sound engineer must decide how much compression should be used to balance the natural performance and printing a good level to tape or disk.
  • Page 16: System Set-Ups

    LIVE SOUND SYSTEM WITH STEREO COMPRESSION PL1602 Mixer Left High / Mid PL 1602 16 CHANNEL LINE MIXER SAMSON TECHNOLOGIES CORP., NEW YORK, U.S.A. S / N POWER MIC 1 INPUTS BALANCED 10KΩ -30 to +4db TIP + RING - SLEEVE GND.
  • Page 17: System Set-Ups

    S•com plus System Set-Ups LIVE SOUND SYSTEM WITH MULTIBAND COMPRESSION PL1602 Mixer Left High / Mid SAMSON TECHNOLOGIES CORP., NEW YORK, U.S.A. PL 1602 16 CHANNEL LINE MIXER S / N POWER MIC 1 INPUTS BALANCED 10KΩ -30 to +4db TIP + RING - SLEEVE GND.
  • Page 18: S•Com Plus Connections

    S•com plus Connections CONNECTING THE S•com plus The are several ways to interface the S•com plus to support a variety of applications. The S•com plus features servo-balanced inputs and outputs, so connecting balanced and unbalanced signals is possible without any sig- nal loss.
  • Page 19: Note De Ray Kennedy

    Aujourd’hui, nous pouvons enfin disposer de VCA de très haute qualité, pas trop chers et permettant des traitements sonores sophistiqués et polyvalents, comme les appareils S-Class de Samson. Ray Kennedy Ray Kennedy est producteur, ingénieur du son et parolier. Il est basé...
  • Page 20: Caractéristiques Du S•Com Plus

    AUTO I/O METER IN/OUT Le processeur de dynamique Samson S com Plus utilise une technologie de pointe en matière de gestion du gain. Voici quelques-unes de ses principales caractéristiques : • Processeur de dynamique complet à deux canaux, avec compresseur/limiteur, expanseur/Noise Gate, dé-esseur et limiteur de crêtes.
  • Page 21: Réglages Et Fonctions

    Réglages et fonctions FACE AVANT GAIN REDUCTION dB INPUT / OUTPUT LEVEL dB DE-ESSER LEVEL dB LIMIT 24 21 18 15 -18 -12 +9 +12 +18 STEREO LINK EXPANDER/GATE COMPRESSOR / LIMITER CH 1 DE-ESSER TRIGGER THRESHOLD RATIO ATTACK RELEASE OUTPUT LEVEL LIMITER...
  • Page 22 Réglages et fonctions GAIN REDUCTION dB INPUT / OUTPUT LEVEL dB DE-ESSER LEVEL dB LIMIT 24 21 18 15 -18 -12 +9 +12 +18 POWER LINK CH 2 EXPANDER/GATE COMPRESSOR / LIMITER DE-ESSER TRIGGER THRESHOLD RATIO ATTACK RELEASE OUTPUT LEVEL LIMITER GATE OFF +10...
  • Page 23: Utilisation Du S•Com Plus

    Utilisation du S•com Plus Que vous soyez un ingénieur du son expérimenté ou amateur, suivez les étapes ci-dessous pour configurer votre appareil. Les sections suivantes définissent les principes de la dynamique et les paramètres associés, ainsi que les configurations système et les applications de traitement de la dynamique en enregistrement et sur scène. CONFIGURATION DU S•com Plus •...
  • Page 24: Utilisation Du Noise Gate

    Utilisation du S•com Plus • À présent, tournez progressivement le potentiomètre GAIN REDUCTION dB 24 21 18 15 THRESHOLD et écoutez la compression obtenue. Vous disposez d’une représentation visuelle de la ER/GATE COMP compression sur l’afficheur GAIN REDUCTION. THRESHOLD RATIO ATTAC •...
  • Page 25: Utilisation De L'enhancer

    Utilisation du S•com Plus UTILISATION DE L’ENHANCER Appuyez sur la touche ENHANCER du S•com plus (position enfoncée) pour activer le circuit EFR (Enhanced Frequency Recovery). Lorsque l’Enhancer est activé, le circuit EFR du S•com Plus rétablit le contenu hautes fréquences qui est perdu lorsqu’une forte réduction de gain est appliquée. Le circuit EFR du S•com Plus restaure les aigus du signal initial en prenant une valeur proportionnelle à...
  • Page 26: De Dynamique

    Éléments de base sur les processeurs de dynamique Pour comprendre les notions relatives au traitement de la dynamique, nous devons tout d’abord comprendre ce qu’est la dynamique. La dynamique ou plage dynamique d’un signal ou d’un appareil audio correspond à la dif- férence entre le niveau le plus faible et le niveau le plus élevé...
  • Page 27: De Dynamique

    Éléments de base sur les processeurs de dynamique - Suite Soft-Knee/Hard-Knee Pour éviter les enveloppes dures ou non naturelles sur les sons compressés, les processeurs de dynamique sophistiqués, comme le S•com Plus, sont équipés d’un détecteur intelligent Smart Knee (SKD), soit un circuit Knee automatique.
  • Page 28: Applications

    Applications Utilisation de l’expanseur/Noise Gate pour supprimer le souffle et le bruit Le S•com Plus s’avère être un outil très utile pour réduire le niveau des bruits parasites. Grâce à l’expanseur/Noise Gate, vous pouvez occulter les bruits parasites dans le bruit de fond ou les supprimer com- plètement.
  • Page 29: Applications

    Applications Niveler la dynamique d’une piste de chant Lorsque vous enregistrez une piste de chant, il se peut que le chanteur se déplace plus ou moins loin du micro ou il se peut que l’enregistrement ait naturellement une plage dynamique importante. Le cas échéant, l’ingénieur du son doit décider de la compression à...
  • Page 30: Configurations Du Système

    Configurations du système S•com Plus SYSTÈME DE SONORISATION DE SCÈNE AVEC COMPRESSION STÉRÉO PL1602 Mélangeur Gauche : Aigus/Médiums SAMSON TECHNOLOGIES CORP., NEW YORK, U.S.A. PL 1602 16 CHANNEL LINE MIXER S / N POWER MIC 1 INPUTS BALANCED 10KΩ -30 to +4db TIP + RING - SLEEVE GND.
  • Page 31 SYSTÈME DE SONORISATION LIVE AVEC COMPRESSION MULTIBANDE PL1602 Mixer Left High / Mid PL 1602 16 CHANNEL LINE MIXER SAMSON TECHNOLOGIES CORP., NEW YORK, U.S.A. S / N POWER MIC 1 INPUTS BALANCED 10KΩ -30 to +4db TIP + RING - SLEEVE GND.
  • Page 32: Connexions Du S•Com Plus

    Connexions du S•com Plus CONNEXION DU S•com Plus Il existe plusieurs façons d’intégrer le S•com Plus à différentes applications. Le S•com Plus est équipé d’entrées/sorties à symétrie électronique. Ainsi, la connexion de signaux symétriques et asymétriques peut se faire sans perte de signal. Le S•com Plus peut être relié...
  • Page 33: Vorwort Von Ray Kennedy

    Wir sind jetzt endlich in einem Zeitalter sehr hochwertiger VCAs angekommen, die nicht mehr so teuer sind und sehr komplexe und vielseitige Schaltungskonzepte ermöglichen – wie die S-Class Geräte von Samson. Ray Kennedy Ray Kennedy lebt in Nashville und arbeitet als Produzent, Tontechniker und Komponist.
  • Page 34: S•Com Plus Features

    IN/OUT RELEASE ENHANCER AUTO I/O METER IN/OUT Der Samson S com Plus Dynamikprozessor verwendet modernste Gain Management-Technologie. Hier die Hauptfunktionen: • Voll ausgestatteter, 2-kanaliger Dynamikprozessor mit Compressor/Limiter, Expander/Gate, De-Esser und Peak Limiter. • SKD (Smart Knee Detector) schaltet – basierend auf dem Pegel des Eingangssignals – zwischen Soft Knee- und Hard Knee-Kompression um.
  • Page 35: Regler Und Funktionen

    Regler und Funktionen VORDERSEITE GAIN REDUCTION dB INPUT / OUTPUT LEVEL dB DE-ESSER LEVEL dB LIMIT 24 21 18 15 -18 -12 +9 +12 +18 STEREO LINK CH 1 EXPANDER/GATE COMPRESSOR / LIMITER DE-ESSER TRIGGER THRESHOLD RATIO ATTACK RELEASE OUTPUT LEVEL LIMITER STEREO...
  • Page 36 Regler und Funktionen GAIN REDUCTION dB INPUT / OUTPUT LEVEL dB DE-ESSER LEVEL dB LIMIT 24 21 18 15 -18 -12 +9 +12 +18 POWER LINK CH 2 EXPANDER/GATE COMPRESSOR / LIMITER DE-ESSER TRIGGER THRESHOLD RATIO ATTACK RELEASE OUTPUT LEVEL LIMITER GATE OFF +10...
  • Page 37: S•Com Plus Einrichten

    S•com plus bedienen Gleichgültig ob Sie ein erfahrener Tontechniker sind oder sich gerade in die Materie einarbeiten oder einfach experimentieren möchten, gehen Sie anfänglich wie unten beschrieben vor. Kommende Abschnitte dieses Handbuchs befassen sich mit Dynamik-Grundlagen und den zugehörigen Parametern, Systemeinrichtungen sowie Anwendungsmöglichkeiten für die Dynamikbearbeitung bei Aufnahmen und Live-Beschallungen.
  • Page 38: Signal Gaten

    S•com plus bedienen • Drehen Sie jetzt den THRESHOLD-Pegel langsam GAIN REDUCTION dB 24 21 18 15 zurück und achten Sie auf die Kompression. Optisch wird die Kompressionsstärke auf der GAIN ER/GATE COMP REDUCTION-Anzeige dargestellt. THRESHOLD RATIO ATTAC • Lösen Sie die AUTO-Taste, um mit manuell gesteuerten GATE ATTACK- und RELEASE-Zeiten zu experimentieren.
  • Page 39: Enhancer Einsetzen

    S•com plus bedienen ENHANCER EINSETZEN Mit der ENHANCER-Taste des S•com plus können Sie die EFR (Enhanced Frequency Recovery) Schaltung aktivieren. Durch Aktivieren des ENHANCERs stellt die S•com plus EFR-Funktion den Höhenanteil wieder her, der bei starker Gain-Reduzierung verloren gegangen ist. Hierzu fügt die S•com plus EFR-Funktion dem Originalsignal wieder Höhen in einer Stärke hinzu, die der Stärke der Gain- Reduzierung entspricht.
  • Page 40: Dynamikbearbeitung 101

    Dynamikbearbeitung 101 Um die Bearbeitung der Dynamik zu verstehen, müssen wir zuerst wissen, was Dynamik ist. Die Dynamik oder der Dynamikbereich eines Signals oder Audiogeräts ist der Pegelbereich zwischen der leisest- und lautest-möglichen Signalausgabe. Dynamikbearbeitung wird auf ein Signal angewandt, um dessen Pegeländerungen zu manipulieren. Zum Steuern der Dynamik sind verschiedene Typen von Bearbeitungsgeräten verfügbar, beispielsweise Noise Gates, Expander, Kompressoren, Limiter und De-Esser.
  • Page 41: Dynamikbearbeitung 101

    Dynamikbearbeitung 101 – Fortsetzung Soft-Knee / Hard-Knee Um schroffe, unnatürliche Hüllkurven bei komprimierten Signalen zu verhindern, verfügen komplexe Dynamikprozessoren wie der S•com plus über eine SKD-Funktion (Smart Knee Detector) oder eine Automatic Knee-Schaltung. Der Smart Knee Detector schaltet automatisch von Soft-Knee (Signal weniger als 10 dB über dem Schwellwert) auf Hard-Knee (Signal 10 dB und mehr über dem Schwellwert) um.
  • Page 42: Anwendungen

    Anwendungen Zischen und Rauschen mit dem Expander/Gate entfernen Der S•com plus ist ein extrem nützliches Werkzeug zur Verringerung des Pegels unerwünschter Geräusche. Mit dem Expander/Gate können Sie das Rauschen effektiv in den Noise Floor-Bereich verschieben oder das uner- wünschte Signal abrupt völlig ausschalten. Nehmen wir an, Sie möchten das Übersprechen verringern, das auftritt, wenn verschiedene Instrumente dicht nebeneinander aufgenommen werden.
  • Page 43 Anwendungen Pegel einer Gesangsspur regeln Beim Aufnehmen einer Gesangsspur ändert der Sänger vielleicht häufig seine Entfernung zum Mikrofon oder er verfügt bei seiner Darbietung von Natur aus über einen breiten Dynamikbereich. In beiden Fällen muss der Toningenieur entscheiden, wieviel Kompression für eine Balance zwischen natürlicher Performance und Aufzeichnung eines optimalen Pegels auf Band oder Festplatte nötig ist.
  • Page 44: System-Einrichtungsbeispiele

    S•com plus System-Einrichtungen LIVE BESCHALLUNGS-SYSTEM MIT STEREO-KOMPRESSION PL1602 Mischer Links : Höhen / Mitten SAMSON TECHNOLOGIES CORP., NEW YORK, U.S.A. PL 1602 16 CHANNEL LINE MIXER S / N POWER MIC 1 INPUTS BALANCED 10KΩ -30 to +4db TIP + RING - SLEEVE GND.
  • Page 45 LIVE BESCHALLUNGS-SYSTEM MIT MULTIBAND-KOMPRESSION PL1602 Mixer Left High / Mid PL 1602 16 CHANNEL LINE MIXER SAMSON TECHNOLOGIES CORP., NEW YORK, U.S.A. S / N POWER MIC 1 INPUTS BALANCED 10KΩ -30 to +4db TIP + RING - SLEEVE GND.
  • Page 46: S•Com Plus Anschlüsse

    S•com plus Anschlüsse S•com plus ANSCHLIESSEN Es gibt verschiedene Möglichkeiten, um den S•com plus zwischenzuschalten und für ein breites Spektrum an Anwen-dun- gen zu nutzen. Der S•com plus verfügt über servo-symmetrierte Eingänge und Ausgänge, wodurch sich symmetrische und asymmetrische Signale ohne Signalverlust anschließen lassen. Sie können den S•com plus für ein Einzelinstrument ver- wenden, indem Sie ihn mit dem Einschleifweg des betreffenden Kanals verbinden, oder für eine gesamte Mischung, indem Sie ihn "in-line"...
  • Page 47: Prólogo De Ray Kennedy

    Ahora, por fin, hemos llegado a una época de VCAs de gran calidad que no son muy caros y que permiten unos diseños muy sofisticados y versátiles, como es el caso de las unidades S-Class de Samson. Ray Kennedy Ray Kennedy es un productor, ingeniero y compositor establecido en Nashville cuya compañía productora, Twang Trust, una...
  • Page 48: Características Y Funciones De S•Com Plus

    AUTO I/O METER IN/OUT El procesador de dinámica Samson S com Plus utiliza la última tecnología en el diseño de gestión de la ganancia. A continuación encontrará algunas de sus principales características y funciones: • Procesador de dinámica de dos canales y con todas las funciones necesarias con secciones Compressor/Limiter, Expander/Gate, De-Esser y Limiter.
  • Page 49: Controles Y Funciones

    Controles y funciones DISTRIBUCION DEL PANEL FRONTAL GAIN REDUCTION dB INPUT / OUTPUT LEVEL dB DE-ESSER LEVEL dB LIMIT 24 21 18 15 -18 -12 +9 +12 +18 STEREO LINK EXPANDER/GATE COMPRESSOR / LIMITER CH 1 DE-ESSER TRIGGER THRESHOLD RATIO ATTACK RELEASE OUTPUT...
  • Page 50 Controles y funciones GAIN REDUCTION dB INPUT / OUTPUT LEVEL dB DE-ESSER LEVEL dB LIMIT 24 21 18 15 -18 -12 +9 +12 +18 POWER LINK CH 2 EXPANDER/GATE COMPRESSOR / LIMITER DE-ESSER TRIGGER THRESHOLD RATIO ATTACK RELEASE OUTPUT LEVEL LIMITER GATE OFF +10...
  • Page 51: Utilizar El S•Com Plus

    Utilizar el S•com plus Tanto si es un ingeniero de audio muy experimentado como si simplemente está empezando, o sólo desea experimentar, siga los pasos que se indican a continuación para empezar. Las demás secciones de este manual explican la dinámica básica y los parámetros asociados, las configuraciones del sistema y las aplicaciones para utilizar el procesamiento de la dinámica para la grabación y para las aplicaciones de sonido en directo.
  • Page 52: Aplicar Una Compuerta A Una Señal

    Utilizar el S•com plus • Ahora baje gradualmente el nivel de THRESHOLD y GAIN REDUCTION dB 24 21 18 15 escuche la compresión. Si desea una representación visual, la cantidad de compresión aparece indicada en ER/GATE COMP el medidor GAIN REDUCTION. THRESHOLD RATIO ATTAC...
  • Page 53: Utilizar El De-Esser

    Utilizar el S•com plus UTILIZAR EL ENHANCER Es posible utilizar el ENHANCER del S•com plus para activar el circuito EFR (Recuperación de Frecuencia Mejorada). Al utilizar el ENHANCER, el circuito EFR del S•com plus restablece el contenido de frecuencias altas que puede perderse al aplicar una reducción de la ganancia muy alta.
  • Page 54: Procesamiento De Dinámica

    Procesamiento de la dinámica 101 Para empezar a comprender el procesamiento de la dinámica, en primer lugar debemos entender qué es la dinámica. La dinámica, o la gama dinámica de una señal o de un equipo de audio, es la cantidad de nivel entre la salida más suave y la más alta posibles.
  • Page 55 Procesamiento de la dinámica 101 - Continuación Codo suave / Codo fuerte Para evitar unas envolventes ásperas y poco naturales en las señales comprimidas, los procesadores de dinámica sofisticados como el S•com plus incorporan un SKD (Detector de Codo Inteligente) o circuito de codo automático. El Detector de Codo Inteligente cambia automáticamente a un codo suave cuando la señal es menos de 10 dB superior al umbral, y a un codo fuerte cuando la señal es 10db superior al umbral.
  • Page 56: Aplicaciones

    Aplicaciones Utilizar el Expansor o la Compuerta para eliminar siseos y ruidos El S•com plus es una herramienta extremadamente útil para reducir el nivel de los ruidos no deseados. Puede utilizar el Expander/Gate para fundir de manera muy efectiva el ruido dentro del umbral mínimo de ruido, o para desactivar de manera brusca la señal no deseada.
  • Page 57: Aplicaciones

    Aplicaciones Nivelar una pista vocal Al grabar una pista vocal, el vocalista puede cambiar la distancia entre él y el micrófono, o puede tener de manera natural una gama dinámica muy amplia en su interpretación. En cualquier caso, el ingeniero de sonido deberá decidir cuánta compresión deberá...
  • Page 58: Instalaciones Del Sistema

    SISTEMA DE SONIDO EN DIRECTO CON COMPRESIÓN ESTÉREO Mezclador PL1602 Izquierda Altas / Medias PL 1602 16 CHANNEL LINE MIXER SAMSON TECHNOLOGIES CORP., NEW YORK, U.S.A. S / N MIC 1 POWER INPUTS BALANCED 10KΩ -30 to +4db TIP + RING - SLEEVE GND.
  • Page 59: Instalaciones Del Sistema

    SISTEMA DE SONIDO EN DIRECTO CON COMPRESIÓN MULTIBANDA PL1602 Mixer Left High / Mid PL 1602 16 CHANNEL LINE MIXER SAMSON TECHNOLOGIES CORP., NEW YORK, U.S.A. S / N POWER MIC 1 INPUTS BALANCED 10KΩ -30 to +4db TIP + RING - SLEEVE GND.
  • Page 60: Conexiones De S•Com Plus

    Conexiones del S•com plus CONECTAR EL S•com plus Existen diversas maneras de conectar el S•com plus para diferentes aplicaciones. El S•com plus dispone de entradas y salidas servoequilibradas, con lo cual es posible conectar señales equilibradas y no equilibradas sin ninguna pérdida de señal.
  • Page 61: Specifications

    Specifications System Specifications Frequency Response <10Hz to 20kHz +0 / -0.1 dB effect out, -0.4 @ 100kHz, <10Hz to 20kHz +0 / -0.1 dB effect in, -3dB @ >100kHz Dynamic range 116 dB, un-weighted, 22 Hz to 22 kHz 0.008 % typ. @ +4 dBu, 1 kHz Effect out, 0.016% effect in Crosstalk >100dB, 22 Hz to 22 kHz Operating Level...
  • Page 62 Specifications Function Switches Gate Gate or Expander Release Fast/slow Enhancer In/Out In/Out Bypass Switches the detector section to external key input Auto Sets automatic attack and release times and automated timing - program dependent I/O Meter Switches the Input/Output meter to read input or output level De-Esser In/Out Stereo Link...
  • Page 63: Block Diagram

    Block Diagram...
  • Page 64 Notes...
  • Page 65 Notes...
  • Page 67 Samson Technologies Corp. 575 Underhill Blvd. P.O. Box 9031 Syosset, NY 11791-9031 Teléfono: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888 www.samsontech.com scompomv2...

Table of Contents