Pressing Further Boiler Sections Together; Fitting The Lower Thermal Insulation Mat - Viessmann VITOROND 200 Installation Instructions Manual

Boiler section assembly
(cont.)

Pressing further boiler sections together

1.
Fig. 7

Fitting the lower thermal insulation mat

Fig. 8
Note
The support timber can be removed after 3 sections
have been assembled. Position the lower rolled up
thermal insulation mat (supplied with the thermal insu-
lation part 2) behind the back section. Pull the thermal
insulation mat under the sections as they are assem-
bled (every 2 sections) until it reaches the front sec-
tion.
11