Hardware Health Features - ECS 945PL-A Manual

Hardware Health Features

This option displays basic information about your system.
CMOS Setup Utility - Copyright (c) 1985-2004, American Megatrends, Inc.
Hardware Healthy Configure
Case Open Warning
Shutdown Temperature
Hardware Health Configure
SMART FAN Control
SMART CPU Temperature
CPU Tolerance Temperature
StartUp Duty-Cycle
SMART SYS Temperature
SYS Tolerance Temperature
StartUp Duty-Cycle
System Temperature
CPU Temperature
CPU Fan Speed
+/-/:
: Move
F8:Best Performance Settings
Case Open Warning (Disabled)
This item enables or disables the warning if the case is opened up, and the item below indicates the
current ststus of the case.
Shutdown Temperature ( Disabled)
This item enables you to set the maximum temperature the system can reach before powering down.
SMART FAN Control (Enabled)
This item allows you to enable/disable the control of the system fan speed by changing the fan
voltage.
SMART CPU Temperature (70°C)
This item specifies the default CPU temperature. The ranges is from 40°C to 100°C.
CPU Tolerance Temperature (1°C)
This item enables users set the value of the CPU temperature to achieve the start and stop status.
The choices are 1°C, 2°C, 3°C and 4°
Example: SMART CPU Temperature 70°C + 1°C = Start up
SMART CPU Temperature 70°C - 1°C = Stop
StartUp Duty-Cycle(128)
This is output for FAN PWM value. When the CPU temperature is lower than Target Temp-tolerance
value, the value will remain as "128" for FAN speed.
SMART SYS Temperature (45°C)
This item specifies the default CPU temperature. The ranges is from 40°C to 100°C.
SYS Tolerance Temperature (1°C)
This item enables users set the value of the CPU temperature to achieve the start and stop status. The choices are 1°C, 2°C,
3°C and 4°C.
Example: SMART CPU Temperature 70°C + 1°C = Start up
SMART CPU Temperature 70°C - 1°C = Stop
StartUp Duty-Cycle(30%)
This item allows users to manually set the StartUp Duty-Cycle of the smart fan, in order to let the
system control the fan speed in an efficient way.
Hardware Health Features
[Disabled]
[Disabled]
[Enabled]
[70]
°]
[1
[128]
[45]
°]
[1
[30%]
1 2 3
° °
:21 /69 F
1 2 3
1 2 3
° °
: 6 9 C/156 F
1 2 3
: 3308 RPM
Value Enter : Select F1: General Help
F9: Optimized Settings F10: Save
C.
Using BIOS
Help Item
ESC: Exit
37