Advanced Bios Features - ECS 945PL-A Manual

30
Quick Boot (Enabled)
If you enable this item, the system starts up more quickly be elimination some of the power on test
routines.
Quiet Boot(Disabled)
If enabled,BIOS will show a full screen logo at boot; if disabled, BIOS will set the initial display mode
to BIOS and show the diagnostic POST screen at boot.
Boot Up NumLock (On)
This item defines if the keyboard Num Lock key is active when your system is started.
Press <Esc> to return to the main menu setting page.

Advanced BIOS Features

This page sets up more advanced information about your system. Handle this page with
caution. Any changes can affect the operation of your computer.
Advanced Settings
CPU Configuration
Floppy Configuration
IDE Configuration
SuperIO Configuration
Voltage Adjustment
F8:Best Performance Settings
CPU Configuration (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility - Copyright (c) 1985-2004, American Megatrends, Inc.
CPU Configuration
Manufacturer : Intel
Brand String : Genuine Intel(R) CPU 3.00GHz
Frequency
FSB Speed
Cache L1
Cache L2
Hyper Threading Technology
Max CPUID Value limit
CPU TM function
CPU Over-clocking Func.
PCIE CLK Synchronize
F8:Best Performance Settings
Manufacturer/Brand String/Frequency/FSB Speed
These are display-only fields and display the information of current manufacturer, brand of the CPU,
frequency and Front Side Bus of the CPU installed in your computer.
CMOS Setup Utility - Copyright (c) 1985-2004, American Megatrends, Inc.
Advanced BIOS Features
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
+/-/:
Value
: Move Enter : Select
F9: Optimized Settings
CPU Configuration
: 3.00GHz
: 800MHz
: 16KB
: 1024KB
[Enabled]
[Disabled]
[TM1]
[Disabled]
[Disabled]
+/-/:
: Move
Value
Enter : Select
F9: Optimized Settings
Using BIOS
Help Item
Configure CPU
F1: General Help ESC: Exit
F10: Save
Help Item
Sets the ratio
between CPU Core
Clock and the FSB
Frequency.
Note: If a invalid
ratio has been
entered to this field.
BIOS will restore it
to previous state.
F1: General Help ESC: Exit
F10: Save