Makita CL104D Instruction Manual page 11

CAUTION:
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
► Fig.32
Wash the dust bag in soapy water when it is clogged
with dust and the cleaner power becomes small. Dry it
out thoroughly before use. An insufficiently dried bag
may cause poor suction and shorten the service life of
the motor.
NOTE:
• Paper pack is a throw-away type.
When the sponge filter is clogged with dust, remove it
from the cleaner and then wipe it off or wash in water.
Removing and installing the sponge
filter
► Fig.33: 1. Sponge filter
To remove the sponge filter, remove the dust bag or
paper pack and then pinch and take it out.
► Fig.34: 1. Sponge 2. Recessed wall
Press in the whole edge of the sponge filter against the
recessed wall inside the dust bag/paper pack mounting
area.
CAUTION:
• After cleaning sponge filter, be sure to install
it on the cleaner. If washed in water, dry it up
before installing. An insufficiently dried sponge
filter may shorten the service life of the motor.
TROUBLE SHOOTING
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual,
do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace-
ment parts for repairs.
Symptom
Is dust bag or paper pack full of dust ?
Is dust bag clogged ?
Weak suction
power
Is paper pack clogged ?
Is battery cartridge exhausted ?
Not working Is battery cartridge exhausted ?
NOTE:
• Do not attempt to repair cleaner by yourself.
Disposing cleaner
A Li-ion battery is built into this cleaner. Always remove
it before disposing of the cleaner.
Area to be investigated
11 ENGLISH
The nozzle cleaning
When the nozzle brush gets dusty, clean up the dust
with sticky.
► Fig.35: 1. Brush
Wall mount for cordless cleaner
Optional accessory
NOTE: The screw to mount the holder is not included.
Prepare a screw which fits with the material to screw
into.
Attach the wall mount for cordless cleaner to a hard
wooden wall, beam or column, where the wall mount
for cordless cleaner can be firmly secured. Always be
sure that the wall mount for cordless cleaner is securely
attached before hanging the cleaner.
► Fig.36: 1. Wall mount for cordless cleaner 2. Plug
CAUTION:
Do not hang the cleaner to the wall
mount violently or hang other appliances than the
cleaner.
NOTE: When you don't charge the cleaner, the plug
can be stored on the wall mount for cordless cleaner
as illustrated.
Fixing method
Empty dust bag or paper pack.
Dust down or wash the dust
bag.
Replace paper pack.
Charge the battery.
Charge the battery.