Log; Options During A Video Call - Nokia N80 Manual

9244700_N80-1_en_zh.book Page 66 Thursday, March 23, 2006 2:34 PM
Transfer, and Open active standby. Select from the
following:
Replace—to end an active call and replace it by answering
the waiting call.
Send MMS (in UMTS networks only)—to send an image or
a video in a multimedia message to the other participant
of the call. You can edit the message and change the
recipient before sending. Press
compatible device (network service).
Send DTMF—to send DTMF tone strings, for example,
a password. Enter the DTMF string or search for it in
Contacts. To enter a wait character (w) or a pause character
(p), press repeatedly. Select
Tip! You can add DTMF tones to the
or DTMF fields in a contact card.

Options during a video call

Select Options during a video call for the following
options: Enable or Disable (video, audio, or both),
Activate handset (if a compatible headset with Bluetooth
connectivity is attached) or Activate handsfree
compatible headset with Bluetooth connectivity is
attached), Activate loudsp.,
standby, Use main camera/Use secondary
Change image order, Zoom in/Zoom
The available options may vary.
66
To monitor the phone numbers of missed, received, and
dialed voice calls, press
Recent
only if the network supports these functions, the device is
switched on, and within the network service area.
to send the file to a
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options
register, scroll to the event, and press
OK to send the tone.
Phone number Call duration
To monitor the approximate duration of your incoming
and outgoing calls, press
Call duration.
To set the display of the call timers while a call is active,
select
duration
(when a
End active call, Open active
camera,
out, and Help.

Log

, and select My own
calls. The device registers missed and received calls
Options >
> Clear list. To clear an individual event, open a
.
, and select My own
My own > Log > Options > Settings
> Yes or No.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
> Log >
Clear recent
> Log >
> Show call