Nokia N80 Manual page 99

Hide thumbs Also See for N80:
Table of Contents

Advertisement

9244700_N80-1_en_zh.book Page 97 Thursday, March 23, 2006 2:34 PM
Prompt
password—If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
Authentication—Select
Normal
or Secure.
Homepage—Depending on the access point you are setting
up, enter the Web address or the address of the multimedia
messaging center.
Select
Options
>
Advanced settings
following settings:
Network
type—Select the Internet protocol type to use:
IPv4 settings
or
IPv6
settings. The other settings depend
on the selected network type.
Phone IP address
(for IPv4 only)—Enter the IP address of
your device.
DNS
address—In
Primary name
serv.:, enter the IP address
of the primary DNS server. In
Second. name
enter the IP address of the secondary DNS server.
Contact your Internet service provider to obtain
these addresses.
Proxy serv.
address—Define the address for the proxy
server.
Proxy port
number—Enter the proxy port number.
Wireless LAN
Follow the instructions from your service provider.
WLAN netw.
name—Select
netw.. If you select an existing network,
mode
and
WLAN security mode
settings of its access point device.
Hide WLAN
network—Select whether the network name
is shown.
WLAN netw.
to change the
network and to allow devices to send and receive data
directly; a wireless LAN access point device is not needed.
WLAN security
802.1x
(not for ad hoc networks), or
ad hoc networks). If you select
encryption is used. The WEP, 802.1x, and WPA functions
can be used only if the network supports them.
WLAN security
security mode.
server:,
Security settings for WEP:
WEP key in
use—Select the WEP key number. You can
create up to four WEP keys. The same settings must be
entered on the wireless LAN access point device.
Enter manually
or
Search for
WLAN netw.
are determined by the
mode—Select
Ad-hoc
to create an ad hoc
mode—Select the encryption used: WEP,
WPA/WPA2
(not for
Open
network, no
sett.—Enter the settings for the selected
97

Advertisement

Table of Contents
loading

This manual is also suitable for:

N series

Table of Contents