Installing Driver - MSI EFINITY Series Manual

Installing Driver

Install Driver in Windows Vista / XP / 2000
† New Windows Vista / XP / 2000 Installation
The following details the installation of the drivers while installing W indows XP /
2000.
1. W hen you start installing W indows XP and older operating systems, you
may encounter a message stating, "Setup could not determine the type of
one or more mass storage devices installed in your system". If this is the
case, then you are already in the right place and are ready to supply the
driver. If this is not the case, then press F6 when prompted at the begin-
ning of W indows setup.
2. Press the "S" key to select "Specify Additional Device".
3. You should be prompted to insert a floppy disk containing the JMicron RAID
driver into the A: drive.
Note: For W indows Vista you can use Floppy, CD/DVD or USB.
Important
Please follow the instruction below to make an "JMicron RAID Driver" for
yourself.
1. Insert the MSI CD into the CD-ROM drive.
2. Click the "Browse CD" on the Setup screen.
3. Copy all the contents in the \\IDE\JMicron\Floppy32 (for 32-bit OS) or
\\IDE\JMicron\Floppy64 (for 64-bit OS) to a formatted floppy disk.
4. The driver diskette for JM icron RAID Controller is done.
4. For W indows Vista:
During the Operating system installation, after selecting the location to
install Vista click on "Load Driver" button to install a third party SCSI or
RAID driver.
5. W hen prompted, insert the floppy disk or media (Floppy, CD/DVD or USB)
you created in step 3 and press Enter.
6. You should be shown a list of available SCSI Adapters.
7. Select the appropriate JMicron RAID controller and press ENTER.
8. The next screen should confirm that you have selected the JMicron RAID
controller. Press ENTER again to continue.
9. You have successfully installed the JMicron RAID driver, and W indows
setup should continue.
10. Leave the disk in the floppy drive until the system reboots itself. W indows
setup will need to copy the files from the floppy again after the RAID
volume is formatted, and W indows setup starts copying files.
JMicron RAID
C-11