3
.
2
V
i
g
o
r
2
9
1
5
3
.
2
V
i
g
o
r
2
9
1
LED
Status
ACT
Blinking
Off
Internet
On
Off
Blinking
W2/P4
On
Off
Blinking
P3~P1
On
Off
Blinking
W1
On
Off
Blinking
USB
On
Blinking
WISPr
On
Off
Blinking
2.4G/5G
On
Blinking
F
a
c
5
F
a
c
Explanation
The router is powered on and running normally.
The router is powered off.
Internet connection is ready.
Internet connection is not ready.
The data is transmitting.
The WAN/LAN port is connected.
The WAN/LAN port is disconnected.
The data is transmitting.
The LAN port is connected.
The LAN port is disconnected.
The data is transmitting.
SFP module is plugged and the fiber link is up.
SFP module is unplugged or the fiber link is down.
The data is transmitting.
USB device is connected and ready for use.
The data is transmitting.
Wi-Fi WAN connected.
Wi-Fi WAN disconnected.
The data is transmitting.
Wireless access point with bandwidth of 2.4GHz/5GHz is
ready.
It will blink slowly while wireless traffic goes through.
ACT and WLAN LEDs blink quickly and simultaneously when
WPS is working, and will return to normal condition after
two minutes. (You need to setup WPS within 2 minutes.)
5
Need help?
Do you have a question about the Vigor2915 Series and is the answer not in the manual?