Operation - Barthelme CHROMOFLEX PRO Series Instruction Manual

One power supply can be used for several units in parallel if the maximum output power of
the supply is observed.
The minimum voltage for correct operation is 8 volts; maximum voltage is 26 volts (+ 5%)
for CHROMOFLEX Pro Bluetooth 4.0.
Important: The power supply should have an equivalent pulse load. Improper power sup-
plies may lead to malfunctions and unwanted flickering effects in the colour changes.
FIG.: 2
230 V AC
6.1 CHROMOFLEX PRO BLUETOOTH 4.0
This model does not have any internal current regulator. Supply voltage is passed through and
the voltage of the power supply must match the voltage of the LED strip.
Note:
LED strips of 10 volts, 12 volts and 24 volts are offered on the market. Depending on the cable
length used LEDs might need very high currents.
„CHROMOFLEX Pro Bluetooth 4.0" 4-channel version is able to control up to 3 amperes per
channel. The 3-channel version is able to control up to 4 amperes per channel.
FIG.: 3
CHROMOFLEX PRO
BLUETOOTH 4.0
power
in
com
com
R
4 channel
G
U : 8 - 26 V DC
IN B
I
: max 4 A/Ch
OUT
P : max 416 W W/A
OUT
8 V to 26 V DC

7. OPERATION

Please operate this unit only when it is working properly. In case of an error, switch off the unit
immediately. Do not operate the unit until it was verified electronically by a qualified electrician.
A case of error is:
• visible signs of damage on the unit
• the unit is not operating properly
• fume rising or crackling sounds from the unit
• visible signs of overheating
Maintenance and service which require access to live components inside the unit must be carried
out by an authorized electrician.
WARNING: RISK OF ELECTRIC SHOCK!
How to avoid malfunctions or fire risk:
• Do not affect air circulation by covering the unit.
• Do not attach anything to the unit e.g. decoration items etc.
• Do not let your children play unattended with electrical equipment. Children cannot always
perceive possible dangers correctly.
7.1 START-UP
Connect LEDs and power supply as shown in fig. 2 and 3. Make sure that LED strips are connected
to CHROMOFLEX Pro Bluetooth 4.0 and the correct power supply was chosen.
7.2 NETWORKING
The CHROMOFLEX Pro Bluetooth 4.0 is working on a radio frequency of 2.4 GHz. This frequency
is often used for other radio controls and wireless sensors. Very strict regulations ensure that
operation free from interference is possible.
The control is carried out using an app, which is available in Google Play Store or Apple App Store.
Only one device can be controlled at a time. Networking between the devices is not possible.
The default pin for the connection is: 123456
7.3 PIN RESETTING
For resetting the pin you have to open the device. After that you can reset the pin with blue button.
Simply press it and whole device will have all settings restored to defaults.