Advertisement
EN
|
Inserts - tips and warnings
Do not exert too much pressure on the pusher when pressing
ingredients down the feed tube.
Pre-cut large ingredients to make them fit into the feed tube.
Fill the feed tube evenly for the best results.
When shredding or granulating soft ingredients, use a low speed to
prevent the ingredients from turning into a puree.
When you have to process a large amount of ingredients, process small
batches and empty the bowl between batches.
Do not let the appliance run too long when you are shredding (hard)
cheese.The cheese will become too hot, will start to melt and will turn
lumpy. Do not use the insert to process chocolate. Only use the blade
(page 15) for this purpose.
Adjustable slicing disc
The adjustable slicing disc allows you to cut ingredients to any
thnickness you like.
Be careful: the slicing insert has a very sharp cutting edge.
1
Insert the slicing insert into the top of the carrier.
2
Attach the adjusting knob to the bottom of the disc and turn it
to the position marked with a dot to lock it.
3
Turn the adjusting knob to set the slicing disc to the slicing
thickness you prefer.
PL
|
20
Essence
RO
|
Discuri - sugestii şi avertismente
Disc reglabil de tăiere în felii
Advertisement
