Semak Warranty - SEMAK M28C Installation, Operation And Warranty Booklet

Charcoal rotisseries
Table of Contents

Advertisement

SEMAK WARRANTY

THIS WARRANTY APPLIES ONLY TO PRODUCTS MANUFACTURED AND SOLD IN AUSTRALIA
The benefits conferred by this warranty are an alternative to all other rights and remedies in
respect of the product which the consumer has under the Trade Practices Act and similar
State and Territory Laws.
Semak warrant each new appliance to be free from defects in materials for a period of 1
Year for Wear & Tear Parts (Worm Gears, Spits & Skewers), and 5 Years on the Motor &
Gearbox from the date of original purchase.
Should defects due to faulty materials or manufacturing process develop within the
warranty period, the appliance will be repaired without charge providing all conditions of
this warranty are observed.
1. Proof of Purchase must be retained by the purchaser.
2. This Warranty is void if the equipment has been damaged due to misuses neglect or is
used for a purpose for which it was not suited; and no repairs, alterations or modifications
have been attempted by other than Semak or its authorised Service Agent.
3. Semak is not responsible for service required due to misapplication, improper installation,
inadequate wiring, incorrect voltage conditions, nor for consequential damages of any kind.
Where required by Statute or local authority, equipment must be installed by qualified
person in accordance with all relevant regulations.
4. Cost of transport of any appliance or part to and from Semak or its Service Agent is to be
paid by the owner.
5. A charge will be made where failure is due to neglect, abuse or accidental damage on the
part of the operator, or when no fault can be found or the fault is due to causes outside the
control of Semak.
6. The above does not preclude the purchaser from their Statutory rights as a consumer.
Register Warranty Online at
www.semak.com.au
Page | 14

Advertisement

Table of Contents
loading

This manual is also suitable for:

M28c2

Table of Contents