Advertisement
MEASURING
INSTRUMENTS
1 WARNINGS
1. Before using the caliper clean the surface of the protective sticker using a clean, dry
cloth. To remove stubborn dirt, use a cloth lightly dampened with ethyl alcohol.
2. Conditions of use
Temperature:
Relative humidity:
3. Prevent the protective sticker from coming into contact with liquids containing water
that could damage the circuit board.
4. Do not allow any part of the digital caliper to come into contact with electric current
(e.g. impact with an electric pen) to prevent damage to the integrated circuits.
5. Remove the battery from its compartment when the caliper is not in use for a long
period of time.
2 DESCRIPTION OF THE INSTRUMENT
1
Scale measurement face
2
Internal measurement faces
3
LCD screen
4
Locking screw
5
1.5V button battery
6
Battery cover
7
Slider
5 – 40°C
less than 80%
Figure 1 - Overview
8
9
10
11
12
13
Protective sticker
Depth measurement bar
External measurement faces
ON/OFF button
Reset button
Measurement unit change button
Page 3 of 5
Advertisement
