Electrolux BGEFU1 Manual page 4

7
7
8
1
ON/OFF
SHORT
CUT
9
2
MODE
TIMER ON
TEMP
8
10
3
FAN
TIMER OFF
11
4
SLEEP
SWING DIRECT
12
5
TURBO SELF CLEAN LED FOLLOW ME
13
6
14
9
TIMER ON Button
Press this button to initiate the auto-on time
sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When
the setting time displays 10, each press will
increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program,
simply adjust the auto-on time to 0.0.
UP Button( )
Push this button to increase the indoor
o
temperature setting in 1 F increments
O
to 86 F.
DOWN Button( )
Push this button to decrease the indoor
o
temperature setting in 1 F increments
O
to 62 F.
NOTE: Press and hold and buttons
together for 3 seconds will alternate the
O O
temperature display between the C & F
scale.
SHORTCUT Button
Used to restore the current settings or
resume previous settings.
On the first time connecting to the power, if
push the SHORTCUT button, the unit
O
will operate on AUTO mode, 80 F, and fan
speed is Auto.
Push this button when remote controller is
on, the system will automatically revert back
to the previous settings including operating
mode, setting temperature, fan speed level
and sleep feature(if activated). And transmit
the signals to the unit.
If push this button when remote controller is
off, the system will only resume the previous
settings and will not transmit the signals to
the unit. And the sleep feature is disable.
If pushing more than 2 seconds, the system
will automatically restore the current
operation settings including operating mode,
setting temperature, fan speed level and
sleep feature(if activated ).
5
10
TIMER OFF Button
Press this button to initiate the auto-off time
sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When
the setting time displays 10, each press will
increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program,
simply adjust the auto-off time to 0.0
11
DIRECT Button
7
Used to change the louver movement and set
the desired up/down air flow direction.
8
1
ON/OFF
SHORT
CUT The louver changes 6 in angle for each press.
9
2
MODE
TIMER ON
TEMP
12
SWING Button
10
3
FAN
TIMER OFF
Used to stop or start horizontal louver auto
11
swing feature.
4
SLEEP
SWING DIRECT
12
5 13
FOLLOW ME Button
TURBO SELF CLEAN
LED FOLLOW ME
13
Push this button to initiate the Follow Me
6
feature, the remote display is actual
14
temperature at its location. The remote control
will send this signal to the air conditioner every
3 minutes interval until press the Follow Me
button again. The air conditioner will cancel
the Follow Me feature automatically if it does
not receive the signal during any 7 minutes
interval.
LED Button
14
Disable/Active indoor screen Display. When
pushing the button, the indoor screen display
is cleared, press it again to light the display.
O
6