Remote Controller Specifications; Function Buttons - Electrolux BGEFU1 Manual

Remote Controller Specifications

Model RG52A1/BGEFU1
3.0V(Dry batteries R03/LR03 2)
Rated Voltage
Signal Receiving
8m
Range
Environment O O
23 F~140 F
Performance Feature
1. Operating Mode: AUTO, COOL, DRY, HEAT and FAN.
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range : 62 F~86 F.
4. Full function of LCD (Liquid Crystal Display).
NOTE:
- Buttons design is based on typical model and might be
slightly different from the actual one you purchased, the
actual shape shall prevail.
-All the functions described are accomplished by the unit, if
the unit has no this feature, there is no corresponding
operation happened when press the relative button on the
remote controller.
-When there are wide differences between Remote controller
Illustration and USERS MANUAL on function description,
the description on USERS MANUAL shall prevail.
O O
3

Function buttons

1 ON/OFF Button
Operation starts when this button is pressed
and stops when this button is pressed again.
MODE Button
2
Each time the button is pressed, the operation
mode is selected in a sequence of following:
NOTE Please do not select HEAT mode
if the machine you purchased is cooling
7
only type. Heat mode is not supported by
the cooling only appliance.
8
1
ON/OFF
SHORT
CUT
3
FAN Button
9
2
MODE Used to select the fan speed in four steps:
TIMER ON
TEMP
10
3
FAN
TIMER OFF
11 4
SLEEP Button
4
SLEEP
SWING DIRECT
12 Active/Disable sleep function. It can maintain
5
the most comfortable temperature and save
TURBO SELF CLEAN
LED FOLLOW ME
13
energy. This function is available on COOL,
6
HEAT or AUTO mode only .
14
NOTE: While the unit is running under SLEEP
mode, it would be cancelled if MODE, FAN
SPEED or ON/OFF button is pressed.
5
TURBO Button
Active/Disable Turbo function. Turbo function
enables the unit to reach the preset
temperature at cooling or heating operation
in the shortest time(if the indoor unit does not
support this function, there is no
corresponding operation happened when
pressing this button.)
6 SELF CLEAN Button
Active/Disable Self Clean function.
Under self clean mode, the air conditioner
will automatically clean and dry the
evaporator and keep it as fresh for the next
operation.
AUTO COOL DRY HEAT FAN
AUTO LOW MED HIGH
4