Troubleshooting - Brother PT-P710BT Quick Setup Manual

Troubleshooting

If you need additional help, visit support.brother.com
Problem
The label printer does not
print.
correctly.
inside the label printer.
A tape jam error cannot
be cleared despite
following the
troubleshooting steps.
A horizontal gap runs
through the middle of the
printed label.
An error occurred when
using a mobile app.
I want to cancel the
current printing job.
via Bluetooth.
enough to communicate.
a microwave oven) are located nearby.
from a computer.
USB cable when printing from a computer.
jammed tape, and then cut it.
Contact Brother customer service.
Streaks or poor quality printed labels generally indicate that the
Print Head is dirty. See the
FAQs & Troubleshooting
Make sure that the label printer is on, and then lightly press the
Power button.
Solution
is inserted correctly.
ver is securely closed.
not paired with another device.
t off the bent section.
ed at the Tape Exit Slot.
Support page
.