Table of Contents
Advertisement
The meanings of the annunciater LEDs in operation are given below.
LED
Symbol Name
Pwr
Power
Lnk
Link
Err
Error
Blank
Light
RUN LED
LED State
Off
Green
Green, blinking
Green, single flash
Red
LINK/Activity LED
LED State
Off
Green
Green, flickering
ERR LED
LED State
Off
Red, blinking
Red, single flash
MX08 Multichannel Weighing System, Technical Manual, Rev. 2.5
MX08 EC is not powered. Check power cable.
MX08 EC is powered.
No data transmission done.
Data transmission done to xFace or Modbus-RTU
No Error found.
Error: Look at the error table in Section 9.6.
Flash
Blank for 0.3 second
Table 12.1 - Annunciater LEDs
Description
INIT
OPERATIONAL
PRE-OPERATIONAL
SAFE-OPERATIONAL
(Fatal Event)
Description
No link, no activity
Link sensed, no activity
Link sensed, activity exist.
Description
No any error ( or no power )
Invalid configuration; State change received from master is
not possible due to invalid register or object settings.
Unsolicited state change; Slave device application has
changed the EtherCAT state autonomously.
Page 121 of 144
Advertisement
Table of Contents
