Related Manuals for BonsenKitchen VS3803
Summary of Contents for BonsenKitchen VS3803
- Page 1 Vacuum Sealer Operation Instructions Model: VS3803 Customer service: 1-888-965-8032 customer-service@bonsenoa.com...
-
Page 2: Safety Instructions
Introduction Congratulations on the purchase of this modern and high-quality product. This instruction manual contain is important information on safety, usage and disposal. Before using the product, familiarize yourself with all handling and safety guidelines. This appliance may only be used as described and for the purposes indicated. Please also pass these operating instructions on to any future owner(s) Safety Instructions Always abide by the following safety rules and instructions when using electrical... -
Page 3: Personal Safety
Cleaning and maintenance may not be carried out by children unless they are 8 years old or older and are supervised. Children must not play with the vacuum sealer. WARNING: Do not immerse the vacuum sealer in water or other liquids when cleaning it. -
Page 4: Other Safety Considerations
Disconnect the vacuum sealer from power before cleaning and not in use. Allow the vacuum sealer to cool down before putting on or taking off parts and before cleaning. Do not move the vacuum sealer while it is switched on. Other Safety Considerations ... -
Page 5: Electrical Connection
When setting it up, place the appliance on a firm, flat and horizontal surface. Do not place the device in a hot, wet or extremely damp environment or in the vicinity of flammable materials. The mains power socket must be easily accessible, so that the power cable can be easily disconnected in the event of an emergency. - Page 6 ► Fill the bag so that no food scraps or liquids can leak out during welding and get into the appliance. ► Wait 15 seconds before sealing the next bag to allow the appliance to cool down. Parts 1）Seal/Cancel 2）Val seal 3）Suction Interface 4）Out Vac 5）Food...
- Page 7 Functions &Vacuuming 1) Seal In standby state according to this, press the seal button, the sealing indicator will light on, you can begin seal the bag. 2) Stop The machine will stop working when the button is pressed in any state of work. 3) Vac Seal Press this button in standby state, the machine will start vacuuming, then sealing the bag, the Vac Seal indicator light on.
- Page 8 7) Indicator Light (1)Seal indicator light Press “seal/stop” button, the light will be red. After seal, light go out. Press this button again, seal function stop, light go out. (2) Vac seal indicator light Press ”Vac seal” button, the “Vac” indicator light will be green. After Vac seal, the “seal” and “Vac”...
- Page 9 Cleaning ►Remove the plug from the mains power socket before beginning to clean the device. ►Ensure there isn’t moisture can penetrate the device during leaning. ►Do not use aggressive or abrasive cleaning agents, as these may corrode the surface of the casing. ►Do not use any hard or sharp objects to remove any adhesive from the welding wire.
-
Page 10: Warranty Claim Procedure
Please keep your receipt as proof of purchase. Please contact with our Customer Service in case of a warranty claim. Technical Data Model No.: VS3803 Operating Voltage: 120V~ 60Hz Power Consumption: 125W Max. Width for Shrink-wrapping: 300mm（11.81Inch）...
Need help?
Do you have a question about the VS3803 and is the answer not in the manual?
Questions and answers