Download
Share
Print this page
BonsenKitchen VS3906 Operation Instructions Manual
  1. Manuals
  2. Brands
  3. BonsenKitchen Manuals
  4. Food Saver
  5. VS3906
  6. Operation instructions manual

BonsenKitchen VS3906 Operation Instructions Manual

Vacuum sealer
Hide thumbs

Advertisement

Quick Links

Download this manual
Vacuum Sealer
Operation Instructions
Model:VS3906
1-888-965-8032
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the VS3906 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for BonsenKitchen VS3906

Summary of Contents for BonsenKitchen VS3906

  • Page 1 Vacuum Sealer Operation Instructions Model:VS3906 1-888-965-8032...

  • Page 2: Safety Instructions

    Introduction Congratulations on the purchase of this modern and high-qualityproduct. This instruction manual contains important information on safety, usage and disposal. Before using the product, familiarize yourself with all handling and safety guidelines. This devicee may only be used as described and for the purposes indicated. Please also pass these operating instructions on to any future owner(s).
  • Page 3 SAVE THESE INSTRUCTONS OPERATING INSTRUCTIONS If the SUPPLY CORD is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. A short power-supply cord is to be provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.

  • Page 4: Scope Of Delivery

    Returning the packaging to the materials cycle conserves raw materials and reduces the amount of waste that is generated. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations. NOTE: If possible, keep the original packaging during the warranty period so that the device can be properly packed for returning in the event of a warranty claim.
  • Page 5 not be inserted further than the rear sealing ring and must lie between the front and rear sealing ring. If the bag lies over one or both of the sealing rings, the bag cannot be properly sealed. The bag opening must lie flat on the welding wire. Otherwise, welding will not work properly.
  • Page 6 Operating the equipment 1. How to use “DRY” vacuum mode : (2 Inches) (Pic.1) (Pic.2) Plug in the vacuum sealer. Open the lid Push down both sides of the lid until by pressing buttons on both sides. Place hear a big lock-up sound. (Pic.2) item(s) in bag, allowing at least 5cm (2 inches) of space between bag contents and the open end of bag.
  • Page 7 2. How to use “WET” vacuum mode: (Pic.1) (Pic.2) Push down both sides of the lid until Press “WET” button, indicator light turns hear a big lock-up sound.(Pic.1) on. (Pic.2) It will automatically vacuum the seal. ① ② ③ ④ (Pic.3) (Pic.4) Open the lids by pressing the buttons Take out the bag.
  • Page 8 3. How to seal only: (Pic.1) (Pic.2) Push down both sides of the lid until If you want to seal a bag without vacuuming, hear a big lock-up sound. press “SEAL”button, indicator light turns on. (Pic.2) ① ② ③ (Pic.3) Open the lids by pressing the buttons on both sides after indicator light turns off, then take out the bag.
  • Page 9 4. How to vacuum packaging jar: (Pic.1) (Pic.2) Insert one end of Accessory Hose into Press “EX-VAC” button on the appliance, Accessory Port on appliance. Insert the it starts to vacuum. When it has no sound, other end into port on the jar. (Pic.1 it means job has been finished.
  • Page 10 5. How to vacuum zipper bags: (Pic.1) (Pic.2) Insert one end of Accessory Hose into Press “EX-VAC” button on the appliance, Accessory Port on appliance. Insert the it starts to vacuum. When it has no sound, other end into port on the zipper bag. it means job has been finished.

  • Page 11: Warranty Claim Procedure

    NOTE: Once you have sealed 11 bags continuously, allow the appliance to cool down for about 15 minute. During this cool-down phase, you cannot start the appliance. After the cool-down phase, you can use the appliance as normal. Cleaning Unplug the unit before cleaning it. Make sure that no moisture can penetrate into the device.

  • Page 12: Technical Data

    When the plug does not fit fully in the outlet, reverse the plug. When it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. Technical Data Model No.: VS3906 Operating Voltage: 120VAC 60Hz Power Consumption: 130W Max. Width for Shrink-wrapping: 300mm (11.81 Inch) Vacuum Value: ＜-50Kpa...