Door Removal - Frigidaire A15294604 Use & Care Manual

Phillips™
Head
&
Flathead
Screwdriver
Door Closer
#2 Phillips

NOTE
* We do not recommend to using an
electric tool to unscrew and screw parts
because it may damage the screw threads
or cause screw heads to be stripped off.
However, if you have an electric tool with
torque control, the torque cannot be larg-
er than 6 N·m (53 in.lb).
 NOTE
The direction in which your refriger-
ator doors open (door swing) can be
reversed, from left to right or right to
left, by moving the door hinges from
one side to the other. Reversing the
door swing should be performed by a
qualified person.
IMPORTANT
Before you begin, turn the refrigerator tem-
perature control to OFF and remove the
electrical power cord from the wall outlet.
Remove any food from door shelves.
Door Removal/Reversal:
1. Unplug your refrigerator.
2. By hand, remove the top hinge
cover, lifting the back and pushing it
forward (see Figure 1A).
Socket
Wrench Set
Top Hinge
Screw
5/16"
(8mm)
T20
T25
Bottom
Center
Hinge
Hinge
Screw
Screw

DOOR REMOVAL

T20 & T25
Torx Head
Screwdriver
Putty
Knife
3. Using a 5/16 in. socket, loosen the 3
screws from the top hinge (approx.
⅜ in. – 9 mm) (see Figure 1B).
Figure 1
IMPORTANT
Place the door on a padded surface to
avoid damage.
4. Carefully open the freezer door. Lift
the loosened the top hinge and lift
the door off of center hinge pin. Set
the door aside.
5. Using a 5/16 in. socket, remove the
3 screws from the top hinge, and set
hinge aside (see Figure 1A).

NOTE
Keep the screws so they can be used
on the opposite side.
Hammer
* Optional Tool:
* Hand held
Drill/Driver
A
B
7