Advertisement
LUXTRAN
™
Luminaires for Tunnel Applications
LTSIU SERIES
When using electrical equipment, basic safety precautions should always be followed, including the following:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS
INVOLVED. CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D'INSTALLATION PERTINENT, PAR UNE
PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES
INHÉRENTS. DISCONNECT POWER TO ALL CIRCUITS BEFORE WIRING FIXTURE. INSTALL IN ACCORDANCE WITH ALL NATIONAL,
STATE, AND LOCAL CODES. DO NOT CONNECT TO AN UNGROUNDED SUPPLY. READ ALL FIXTURE MARKINGS AND LABELS TO
ENSURE CORRECT INSTALLATION OF FIXTURE. SUPPLEMENTAL INSTRUCTIONS MAY BE LOCATED ON THE FIXTURE, IN ADDITION
TO THIS INSTRUCTION SHEET, REGARDING ORIENTATION, OR MOUNTING RESTRICTIONS.
The LuxTran LTSIU series luminaires contains sensitive electronics. Take care to avoid damage by improper handling or
static electricity discharge (ESD). Either type of damage could render the system inoperable or cause latent failure.
INSTALLATION INSTRUCTIONS
1. Secure fixture to wall or ceiling using user supplied hardware. Slots for 3/8 bolts are provided in the mounting
brackets. See Figure 1.
10.0
NOTE: If the fixture has directional optics, note the label indicating the direction of light and install appropriately.
www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United State swith more than 50% of the component cost of US origin It may be covered by patents
found at www.kenall.com/patents. Content of speci cation sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg. Co.
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
.44
.94
INSTALLATION INSTRUCTIONS
25.5
Figure 1
1
LTSIU_F-5828_091118
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LEGRAND LUXTRAN LTSIU Series
Summary of Contents for LEGRAND LUXTRAN LTSIU Series
- Page 1 TO THIS INSTRUCTION SHEET, REGARDING ORIENTATION, OR MOUNTING RESTRICTIONS. SAVE THESE INSTRUCTIONS The LuxTran LTSIU series luminaires contains sensitive electronics. Take care to avoid damage by improper handling or static electricity discharge (ESD). Either type of damage could render the system inoperable or cause latent failure.
- Page 2 INSTALLATION INSTRUCTIONS 2. Rotate latches and open door, which is retained by stainless steel cables. 3. Loosen wing nuts and remove Wiring Cover. See figure 2. Figure 2 4. Connect weather tight electrical service to installed lt connector and feed wire leads into user supplied junction box.
- Page 3 INSTALLATION INSTRUCTIONS To replace LED modules- 1. Open door, which is retained by stainless steel cables. 2. Loosen wing nuts and remove Wiring Cover. See Figure 2. 3. Remove reflectors and disconnect LED module leads. See Figure 4. 4. Remove screws securing LED module. Figure 4 5.
-
Page 4: Customer Service
INSTALLATION INSTRUCTIONS CUSTOMER SERVICE For technical assistance, call 1-800-4KENALL (1-800-453-6255). WARRANTY For warranty information visit www.kenall.com/Resources/Certified-Performance-Warranties. www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA This product complies with the Buy American Act: manufactured in the United State swith more than 50% of the component cost of US origin It may be covered by patents found at www.kenall.com/patents.
Need help?
Do you have a question about the LUXTRAN LTSIU Series and is the answer not in the manual?
Questions and answers