Clock Set - Nevir NVR-127D User Manual

7. When you don't want to listen, please press the
switch button
screen displays the clock information.
8. This device is set with detachable back hasp to facilitate
arrangement.
Note:
Press the power
exceed two seconds when pressing the power button. Otherwise, it
enters the sleep state.
USE OF ANTENNA
1. The magnetic antenna inside the radio is used to listen to the
AM. Rotating the radio body can achieve best receiving effect.
2. To listen to FM radio, please pull out the telescopic antenna
and obtain the optimal receiving effect by changing the length
and direction of the antenna .

CLOCK SET

This device adopts 12/24-hour
system. After batteries are loaded,
the clock will run from 12:00 .
1. Under the power-off state, if the
indicator for alarm power-on
" "
is on the display screen,
"
press alarm setting button
(3) to cancel.
"
2. Press the
system flashes. At the flashing state, press
"
(7) or time-button (6) to select 12 or 24 hour time system.
3. After the time system is set, press time mode button (10)
once again and the hour number flashes. At the state when
"
the hour
"
time-button (6) to set the time of hour.
4. After the hour time is set, press time mode button (10)
once to set the time of minute with the method same to that
of setting the hour.
Note:
1. When the time of hour is set, it must be set when the hour
number flashes.
2. When the time of minute is set, it must be set when the minute
number flashes.
3. This device adopts 12-hour system. AM on the display screen
represents the time in the morning and PM represents the time in
the afternoon.
"
(2) to switch off the radio and the display
switch button to turn on the radio. It should not
"
time mode button
"
"
number flashes, press
"
"
"
"
(10) once, the 12/24 hour
"
"
time +button (7) or
"
15
"
power
"
time +button
"
"
"
" "
"
"
"