Nevir NVR-127D User Manual page 18

STORE CHANNEL
1. Use automatic search or manual
serarch to tune channels.
"
2. Press store channel button
(10) and the channel storage
"
indicator PRESET on the
display screen flashes .
3. Under the state when PRESET
flashes, press
"
button (8) or storge address- button (9) to select the
storage address .
4. After the storage address is selected, press the
channel button
channel frequency will be stored in the address you set .
Note:
1. Every band of this radio can store 20 channels and 0 is the first
address for storage of channels. if the channels exist in the number
from 0 to 19, the new frequency stored according to the above
method will overwrite the original frequency. Prior to storage
operation, the user should check whether the selected channel
address has channel.
2. When the channel is stored, it must be done under the condition
when the channel storage indication PRESET flashes. Otherwise,
it is invalid.
TUNE OUT STORED CHANNELS
1. After powering on, press
conversion button (3) to select
band.
"
2. Press storage address+button
"
(8) or storage address-button
(9) buttons to select the storage
address and the radio will tune
the channel stored in this address .
STORAGE SCAN
1. FM and AM ba
"
on the store channel button
(10) for five seconds. The radio
will automatically scan channels
once from the lowest to the
highest frequencies of this band ,
and save the channels scanned
in sequence in the current
storage addresses.
2. During storage scan, press once
"
down tuning button
3. The first channel scanned will be entered after the storage
scan is done.
"
"
"
storge address+
"
"
(10) to confirm the storage address. The
"
"
nd: Long press
"
(6) the scan is terminated .
18
"
"
"
"
band
"
"
"
"
up tuning button
"
store
" "
"
"
(7) or