Clock Setting; Timing Setting - Nevir NVR-123 Instruction Manual

CLOCK SETTING

After installing batteries, in the state of clock, the
12:00
appears on the LCD.
When setting the clock time
1. In the state of turning off the
radio, keep the Time set
button(9) pressed,
2. Meanwhile press the Hour
adjustment button(4)to adjust hour, or meanwhile
press the Minute adjustment button(2) to adjust
minute, it sets clock time.
When calibrating the time
Reset from the beginning
When checking the time
Press Time set/Time display button (9) when
receiving, the time will appear on the display screen.
Attention: The 12 hours system is used in the radio. AM on
the display screen means morning time, PM means afternoon
time.

TIMING SETTING

After completing time set exactly, you can set the
switch on time:
When setting the timing
switch on time
1. In the state of clock, keep
the Time switch on time
set button(8)pressed, the
"AL/SET" appears on the display screen.
2. Respectively press the Hour adjustment button
(4)to adjust hour, press the Minute adjustment
button (2) to adjust minute, you can adjust your
desired switch on time.
When checking the switch on time
Press the timing switch on time set button to display
the switch on time.
Attention: When setting the timing switch on time, AM on the
display screen means morning time, PM means afternoon time.
17