Table of Contents
Advertisement
2. Under sleep time display state,
"
press
sleep function button
(2)
to adjust the sleep time.
3. You can listen to your favorite
channel after the sleep time is
adjusted and the radio will
power off automatically at the
sleep time.
4. To power off in advance, press
to
power off the radio.
The law of sleep time change is as the following:
90-80-70-60-50-40-30-20-10 (cancel sleep function).
AUTOMATIC SEARCH CHANNEL
Under power-on state, keep the up tuning button (7)
under pressed and release it after 2 seconds, the frequency will
search the channel towards high frequency.
Keep the down tuning button (6) under pressed and
release it after 2 seconds, the frequency will search the channel
towards low frequency. Search will stop when thechannel is
found .
MANUAL SEARCH CHANNEL
Under power-on state, press
"
up tuning button
channels towards high frequency.
"
Press down tuning button
to search towards low frequency.
Advert:
1. Automatic search is suitable for strong signal channel searching.
2. During the process of automatic search, if the number on the
display screen slowsdown, it represents that there may be weak
signal channel nearby and manual search is applicable.
3. Manual search for channel is mainly for the shortcomings of
automatic search and scanning storage.
Note:
1. In FM band, the frequency increases/decreases 0.1MHz by pressing
up/down tuning button once.
2. In MW band, the frequency increases/decreases 9 KHz by pressing
up/down tuning button once.
3. Press up tuning button to search frequency in ascending sequence
and press down tuning button to search in descending sequence.
"
"
(7) to search
"
"
sleep function button
"
"
"
(6)
"
(2)
"
Advertisement
Table of Contents
