DENTSPLY ECLIPSE 9494800 Owner's/Operator's Manual page 9

GENERAL OPERATION: Cont.
COOLING SCREEN
Once cooling is completed the display will return to the process menu. The last process used will again be highlighted on the
process menu.
ABORT PROCESS:
When the START/STOP key has been pressed during a process, the following screen is shown to confirm the aborting of the
process.
ABORT PROCESS SCREEN
ESC cancels the abort command.
ABORT PROCESS COOLING SCREEN
If START/STOP was pushed or the door was opened during the process, a long beep will be heard and the cooling screen above
will be shown.
Remove work and allow the unit to cool.
CAUTION: Models may still be hot - Use caution when removing materials from chamber.
!
9