DENTSPLY ECLIPSE 9494800 Owner's/Operator's Manual page 14

MAINTENANCE: Cont.
FUSE REPLACEMENT (220-240V UNITS ONLY):
Mains - located in the rear of the unit inside the inlet socket.
1. Turn the power switch OFF
3. Remove fuse drawer from inlet socket (contains 2 fuses)
using small screwdriver to push on the locking clip.
5. Replace fuse(s) with the F 250V 10.0A fuse(s) (supplied).
6. Push fuse drawer into inlet socket until the clip locks.
7. Plug Unit in.
2. Unplug the unit.
4. Remove fuse drawer.
8. Turn on Power Switch.
14