Table of Contents
Advertisement
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
Note:
The procedures for installing this kit require that you work from under the machine.
Description
No parts required
No parts required
Plug
Valve
Coil (12 V)
Coil nut
Flow-divider manifold
Pressure hose (angled end for
Reelmaster 7000 machines)
Pressure hose (straight end for
Groundsmaster 4500/4700 machines)
Manifold tube
Traction-motor tube (shorter tube for
Groundsmaster 4500/4700 machines)
Traction-motor tube (longer tube for
Reelmaster 7000 machines)
Divider tube
Tank hose
Bolt
Flange nut
Fuse (10 A)
Fuse decal
Toggle switch
Switch wire harness
4WD function decal
Relay wire harness
Relay
Self-tapping screw
Solenoid wire harness
No parts required
Qty.
–
Prepare the machine.
–
Remove the hydraulic lines.
1
Install the coils on the flow-divider
2
manifold assembly (4WD switch
2
installation only).
2
1
1
1
1
1
Install the hydraulic components.
1
1
1
2
2
1
Install the fuse (4WD switch installation
only).
1
1
1
1
Install the switch.
1
1
1
Install the wire harness to the machine
1
(4WD switch installation only).
–
Completing the installation.
2
Use
Advertisement
Table of Contents
