Wen 73016 Instruction Manual

SAFETY INFORMATION

WARNING: Read and understand all warnings, cautions and operating instructions
before using this device. Failure to follow all instructions listed below may result in
personal injury and device damage.
1. OBSERVE work area conditions. Keep work area well lit.
2. ALWAYS keep your work area clean, uncluttered, and well lit. DO NOT work on floor surfaces
that are slippery with sawdust or wax.
3. USE THE RIGHT PRODUCT FOR THE JOB. There are certain applications for which this item
was designed. Do not modify it and do not use it for a purpose for which it was not intended.
4. CHECK FOR DAMAGED PARTS. Before using any product, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its intended
function. Check for any broken or damaged parts and any other conditions that may affect its
operation. Replace or repair damaged or worn parts immediately.
5. WHEN SERVICING use only identical replacement parts and accessories. Using any other parts
will void the warranty.
6. DO NOT operate the tool if you are under the influence of drugs, alcohol, or medication that
may affect your ability to properly use the tool.
7. DO NOT EXCEED THE PRODUCT'S MAXIMUM LOAD CAPACITY. Always keep weight evenly
distributed.
8. ONLY USE ON A FLAT SURFACE capable of supporting the item with its maximum capacity
load. It is easy to lose control if attempting to pull a load on a sloping or uneven surface.
9. DO NOT ALLOW CHILDREN TO PLAY ON, stand upon or climb on this item. It is not intended
for carrying people or animals.
10. ALWAYS CHECK HARDWARE and assembled parts after assembling. All connections should
be tight.
HAVE PRODUCT QUESTIONS? NEED TECHNICAL SUPPORT?
1-800-232-1195 (M-F 8AM-5PM CST)
This item has a 2-year warranty - for the full warranty statement, please visit wenproducts.com.
Replacement parts and the most up-to-date instruction manuals can be found on wenproducts.com
Please feel free to contact us:
TECHSUPPORT@WENPRODUCTS.COM
INSTRUCTION MANUAL
CHROME PLATED BAR STOOL
SPECIFICATIONS
Model
Maximum Capacity
Seat Height
Support Ring Height
Product Weight
Product Dimensions

KNOW YOUR BAR STOOL

Support Ring
Protective Foot Pad
300-POUND CAPACITY
73016
300 pounds evenly distributed
29 inches
13.5 inches
14 pounds
14.5 in. x 14.5 in. x 29 in.
Padded Vinyl Cushion
Chrome Plate Body
MODEL 73016