Page 1
WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions.
Know Your Service Cart ...............5 Assembly ....................6 Exploded View & Parts List ..............8 Warranty Statement ................9 SPECIFICATIONS Model Number 73009 Maximum Capacity 500 lbs (evenly distributed) Upper Tray Inner Dimensions 30" L x 15" W x 2-7/8" H Lower Tray Inner Dimensions 29"...
INTRODUCTION Thanks for purchasing the WEN Service Cart. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool.
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert, and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: Read and understand all warnings, cautions and operating instructions before using this tool. Failure to follow all instructions listed below may result in personal injury and tool damage.
KNOW YOUR SERVICE CART PACKING LIST Check your packing list against the diagram below. If any part is damaged or missing, please contact our customer service at (800) 232-1195, M-F 8-5 CST or email us at techsupport@wenproducts.com. Handle Upper Tray Towel Rack Lower Tray Washers (16)
ASSEMBLY 1. Place the upper tray (Fig. 1 - 1) upside-down on a flat work surface. 2. Turn the push handle (Fig. 1 - 2) upside down with the cup holder towards the tray. Using a rubber mallet, tap the push handle down into the grooves on the tray.
Page 7
ASSEMBLY 6. Insert the carriage bolts (Fig. 4 - 1) up through the leg tabs and the shelf tray. Attach the casters (Fig. 5 - 1) by first hand tightening the washers (Fig. 5 - 2) and nuts (Fig. 5 - 3). Once all four casters are in place, go back and use an adjustable wrench to make sure all nuts and bolts are fully tightened and secure.
(2) years from date of purchase or 500 hours of use; whichever comes first. Ninety days for all WEN products if the tool is used for professional or commercial use.
Need help?
Do you have a question about the 73009 and is the answer not in the manual?
Questions and answers