Tennant V3e Series Operator And Parts Manual page 18

EN
English
Operating Machine:
1.
Turn the cord release latch (Fig. 1) and lift up the cord release handle (Fig.2) to remove the cord (Fig.3). Return the cord
release handle into position and turn the cord release latch to fix into position (Fig. 4 & 5). Always unwind the cord
completely before vacuuming. It is important to maintain the power cord in good condition.
2.
Plug the power cord into a 127V electrical outlet (Fig.6).
3.
Push the on/off button to turn the machine on (Fig. 7) and start vacuuming (Fig.8).
4.
When using the machine on carpets press the rocker switch on the combination floor tool to raise the brushes (Fig. 9).
5.
When using the machine on hard floors press the rocker switch on the combination floor tool to lower the brushes (Fig.10).
3
6
7
18
1
4
8
2
5
9
10
Tennant V3e (04-2017)