Printing A Cd Jacket - Epson STYLUS PHOTO R360 Series User Manual

3. Set the appropriate value. You can adjust the
inside diameter (Inner) between 18 to 46 mm, and
the outside diameter (Outer) between 114 to 120
mm, at intervals of 1 mm.
4. Press the OK button to set the changes you made.
If the printing is misaligned
Follow the steps below to adjust the print position, if
necessary.
1. Press the F [Setup] button to open the Setup
menu.
2. Press the l or r button to highlight Adjust CD
Print Alignment and press the OK button.
3. Press the u or d button to highlight CD/DVD and
press the r button.
4. Select the amount to move the image.
You can select from 0 mm to 2.0 mm.
5. Press the OK button to set the changes you made.
Note:
The printer remembers the print adjustment setting even after it has
been turned off, so you do not need to adjust the position each time
you use the CD/DVD function.
16 Other Creative Printing Options

Printing a CD jacket

You can print a CD jacket on A4 paper in either upper
half print format or in index style. You can print up to
24 photos on one sheet.
1. Load A4 size paper.
Press the CD/DVD [Print CD/DVD] button.
2.
3. When you see this screen, press the OK button.
4. Press the x [Print Settings] button.
5. Select CD Jacket as the Media Type setting.
6. Select the appropriate Paper Type setting for the
paper loaded.
7. Select A4 as the Paper Size setting.
8. Select CD Case Upper or CD Case Index as the
Layout setting and press the OK button.
9. Press the l or r button to select the photos you
want to print for your print layout.
Note:
❏ You can switch the view of photos by pressing the
G [Display/Crop] button (see page 13).
❏ When you press the G [Display/Crop] button once, you
see a yellow frame. You can use this to crop out the rest of
the photo and print just the main subject. See "Cropping and
Sizing Your Photos" on page 21.
10. Press the Copies + or - button to select the number
of copies for each photo.
Note:
❏ When you select CD Case Index as the Layout setting, you
can select a maximum of 24 photos. Unused areas of the
layout are left blank.
❏ To select more than one photo, repeat steps 9 and 10 to
select other photos and the number of times to print them.
11. Press the x Start button to print.