Samsara VG34 Install Manual
Vehicle gateway, heavy duty
Hide thumbs
Also See for VG34:
- Install manual (2 pages) ,
- Install manual (4 pages) ,
- Install manual (9 pages)
Advertisement
Table of Contents
- 1 What You’ll Need
- 2 Locate Vehicle’s Diagnostic Port and Detach It from Its Original Location
- 3 Connect the Samsara Cable. Vehicle’s Diagnostics Remain Accessible Via the Unconnected Port
- 4 Fasten Unconnected Diagnostics Port to Vehicle’s Original Port Location
- 5 Plug the Samsara Cable Gateway Connector into the Gateway. It will Click When Fully Inserted
- 6 Verify the Gateway Indicator Light Turns Green. this Could Take 1-3 Minutes
- 7 Fasten Connected Gateway in a Secure Position Behind the Dashboard Using Zipties
- Download this manual
Vehicle Gateway
INSTALL GUIDE — HEAVY DUTY (J1708)
What you'll need:
1
×
2
×
2
×
1
×
Questions? samsara.com/support
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Samsara VG34
Summary of Contents for Samsara VG34
- Page 1 Vehicle Gateway INSTALL GUIDE — HEAVY DUTY (J1708) What you’ll need: × × × × Questions? samsara.com/support...
- Page 2 Samsara Cable Vehicle port ( Samsara port ( J1708 J1708 Fasten unconnected diagnostics port to vehicle’s Plug the Samsara Cable gateway connector into original port location. the Gateway. It will click when fully inserted. Samsara Cable Vehicle port Samsara port Verify the Gateway indicator light turns green.
Need help?
Do you have a question about the VG34 and is the answer not in the manual?
Questions and answers