Advertisement
Quick Links
Industrial
Gateway
INSTALL GUIDE
1
The IG should be mounted on a 35mm
DIN rail inside a properly rated enclosure,
e.g. NEMA 4x.
To mount it, pull down the latch on the
bottom of the device.
samsara.com/support
2
Angle the unit and hook it onto the DIN
rail, angle it down and push the latch
back up to lock.
HW-IG41
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Samsara IG41
Summary of Contents for Samsara IG41
- Page 1 Angle the unit and hook it onto the DIN DIN rail inside a properly rated enclosure, rail, angle it down and push the latch e.g. NEMA 4x. back up to lock. To mount it, pull down the latch on the bottom of the device. HW-IG41 samsara.com/support...
- Page 2 If the LED turns yellow, a reboot is required. Go to kb.samsara.com to finish setting up If the LED turns red, please call into your device. support.
Need help?
Do you have a question about the IG41 and is the answer not in the manual?
Questions and answers