LEDs & Power Switch
Power IN:
Indicates 12-28vdc is supplied to Toughbook. (RAM
13.8V source to power RAM
Tough-Dock
®
Power OUT:
Indicates 15.6vdc is available for Toughbook.
Docked:
Indicates Toughbook is docked with
RAM
Tough-Dock
when Toughbook is powered on.
®
™
Switched ON:
Power is supplied to Toughbook and Port Replicator from external source.
Switched OFF:
If Toughbook is ON and docked, RAM
Operation
Place Toughbook on RAM
Tough-Dock
®
1
Then use brass locating pins to align back edge.
Specifications
Power Cable
Black wire: Ground
White wire: 12-28vdc
Safety Precaution
Do not install this product near or over an airbag deployment area or in a location that obstructs the driver's vision or interferes with vehicle
operation. National Products, Inc does not assume responsibility or liability for any such personal injury, death or property damage.
To see more mounting options, visit rammount.com
rammount.com
1.800.497.7479
support@rammount.com
®
Tough-Dock
™
draws 3 amps from a
and Toughbook)
™
Tough-Book
will supply power to Port Replicator.
®
™
front edge first.
™
Power Jack
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
for Panasonic Toughbook CF-28, 29, 30 & 31
POWER
IN
Pull latch forward until lock engages.
2
Turn lock clockwise to lock; counter-clockwise to release.
Ground
+12-28V
RAM
Tough-Dock
®
POWER
DOCKED
OUT
RF Jack
Co-axial
RMR-INS-234-PAN1
™