Ram Mounts RAM Quick-Grip Pro with Vibration Damper Assembly Instructions

Parts Index
* not to scale
A
(1) Quick-Grip Pro Holder (1) Anti-Slip Pad
™
Adjust to Your Phone
Attach (D) Caps to top & bottom supports of (A)
1
Holder. Connect (E) Caps to the four side arms.
D
E
To see more mounting options, visit rammount.com
rammount.com
1.800.497.7479
support@rammount.com
B C
(1) Anti-Slip Cover
A
D
A
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
RAM Quick-Grip
®
D
(4) Side Caps
(3) Top & Bottom Caps
2 Insert your phone into (A) Holder. Adjust the side
arms by loosening the screws in the back. Position
the arms against the side of your phone and tighten
the screws.
Troubleshoot:
If a side arm is blocking one of the
phone's buttons:
You may remove the side arm blocking the button,
but there must be at least one arm on each side at
all times.
You may adjust the position of the bottom support
by loosening the two front screws. This will help
offset the bottom away from the arm. Bottom
support adjustment may be limited if
connecting a wireless charger.
Pro with Vibration Damper
™
Assembly Instructions
Patented & Pats. Pend
rammount.com/ip
E F
(1) Decal (1) 53mm Adhesive Pad
RMR-INS-PD5V
.
G