Multi-Function Adapter Class In The Device Manager - National Instruments PCMCIA-232 Getting Started

Appendix D Troubleshooting and Common Questions
double-click on the Multi-function Parent item that corresponds to your
National Instruments serial interface. Use the Resources page to change
the resources. Any resource changes are automatically reflected to the child
devices. Figure D-1 shows the Multi-function adapters class in the
Device Manager.
Figure D-1. Multi-Function Adapter Class in the Device Manager
How do I remove information about PCMCIA two-port or four-port
serial cards from the Device Manager?
Because the two-port PCMCIA cards are single physical devices that
support multiple ports, they are registered as "multi-function adapters"
in the Device Manager. Each port is a child device listed under Ports
(COM & LPT). Windows 95 does not allow multi-function child devices
to be removed directly within the Device Manager. You must open the
Multi-function adapters class as shown in Figure D-1, select your
interface, and click on the Remove button.
© National Instruments Corporation D-5 PCMCIA Serial for Windows 95