Advertisement
Please read these instructions carefully before use and retain for future
reference.
IMPORTANT SAFETY INFORMATION
•
When using electrical appliances basic safety precautions should always be
followed.
•
Check that the voltage indicated on the rating plate corresponds with that of the
local network before connecting the appliance to the mains power supply.
•
This appliance is intended for domestic use only. It should not be used for
commercial purposes.
•
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning the use of
the appliance in a safe way and understands the hazards involved.
•
Children shall not play with this appliance.
•
Cleaning and maintenance shall not be made by children without supervision.
•
personnel.
•
Do not operate this fan with a damaged plug or cord, after a malfunction or after
being dropped or damaged in any way.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service
•
Ensure that the fan is switched off before removing the guard.
•
Do not insert anything through the grille when the fan is in use.
•
Make sure that the fan is on a stable surface when operating.
29" Tower Fan
Model: PEL00309 & PEL00467
Advertisement
Table of Contents
Related Manuals for Pro-Elec PEL00309
Summary of Contents for Pro-Elec PEL00309
- Page 1 29” Tower Fan Model: PEL00309 & PEL00467 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • When using electrical appliances basic safety precautions should always be followed. • Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the appliance to the mains power supply.
-
Page 2: Remote Control
ASSEMBLY • Assemble the base around the cord and align with the posts on the bottom of the fan. It will drop into position when correctly aligned. Note: The plug will not fit through the hole in the base. • Using the screws provided, secure the two base halves together (two screws) and then secure the base to the fan unit (four screws).
Need help?
Do you have a question about the PEL00309 and is the answer not in the manual?
Questions and answers