Advertisement
16" Wall Mount Fan with Remote Control
Please read these instructions carefully before use and retain for future reference.
IMPORTANT SAFETY INFORMATION
•
When using electrical appliances basic safety precautions should always be
followed.
•
Check that the voltage indicated on the rating plate corresponds with that of the
local network before connecting the appliance to the mains power supply.
•
This appliance is intended for domestic use only. It should not be used for
commercial purposes.
•
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning the use of
the appliance in a safe way and understands the hazards involved.
•
Children shall not play with this appliance.
•
Cleaning and maintenance shall not be made by children without supervision.
•
There are no user-serviceable parts in this product. Refer servicing to qualified
personnel.
•
Do not operate this fan with a damaged plug or cord, after a malfunction or after
being dropped or damaged in any way.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
•
Ensure that the fan is switched off before removing the guard.
•
Do not insert anything through the grille when the fan is in use.
•
Make sure that the fan is stable when operating.
•
It is recommended to unplug the fan from the mains socket when not in use.
Model: PEL01926
Advertisement
Table of Contents
Related Manuals for Pro-Elec PEL01926
Summary of Contents for Pro-Elec PEL01926
- Page 1 16" Wall Mount Fan with Remote Control Model: PEL01926 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • When using electrical appliances basic safety precautions should always be followed. • Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the appliance to the mains power supply.
- Page 2 INSTALLATION • Offer the bracket up to the wall in the area of the room that will give adequate fan cooling and mark the position of the three mounting holes. • Ensure the wall can support the weight of the fan and that there are no concealed pipes or wires in the location to be drilled.
- Page 3 Step four Thread the blade cap onto threaded end of the motor shaft. Note: threads are reversed. ie: tighten counter-clockwise: Step five Offer up the front grille to the rear grille with the hook clip centred on the top above wire handle: Step six Press the remaining grille clips onto rear grille to securely attach front grille.
- Page 4 FAN MODES • The remote control has a range of about 8 metres. • Accessed using the Remote Control, this fan has three operating modes that will work with oscillation control ON or OFF. • Normal - Fan speed is consistent with the speed chosen and operates like a standard fan.
Need help?
Do you have a question about the PEL01926 and is the answer not in the manual?
Questions and answers