Pro-Elec PEL01916 Instructions

Pro-Elec PEL01916 Instructions

6” desk fan

Advertisement

Please read these instructions carefully before use and retain for future reference.

IMPORTANT SAFETY INFORMATION

When using electrical appliances basic safety precautions should always be
followed.
Check that the voltage indicated on the rating plate corresponds with that of the
local network before connecting the appliance to the mains power supply.
This appliance is intended for domestic use only. It should not be used for
commercial purposes.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning the use of
the appliance in a safe way and understands the hazards involved.
Children shall not play with this appliance.
Cleaning and maintenance shall not be made by children without supervision.
There are no user-serviceable parts in this product. Refer servicing to qualified
personnel.
Do not operate this fan with a damaged plug or cord, after a malfunction or after
being dropped or damaged in any way.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Ensure that the fan is switched off before removing the guard.
Do not insert anything through the grille when the fan is in use.
Make sure that the fan is on a stable surface when operating.
It is recommended to unplug the fan from the mains socket when not in use.
6" Desk Fan
Model: PEL01916 and PEL01917

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PEL01916 and is the answer not in the manual?

Questions and answers

Summary of Contents for Pro-Elec PEL01916

  • Page 1 6” Desk Fan Model: PEL01916 and PEL01917 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • When using electrical appliances basic safety precautions should always be followed. • Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the appliance to the mains power supply.
  • Page 2 ASSEMBLY • Place the fan motor assembly onto the base and insert the hand wheel screw and fit the nut. • Adjust the angle of the fan and tighten the hand wheel to lock it in position. OPERATION • Connect the mains plug to a suitable outlet. •...

This manual is also suitable for:

Pel01917Pel01916-eu32874333287462

Table of Contents