Kenwood KMM-BT506DAB Instruction Manual page 29

Audio Settings
[MANUAL EQ] Adjusts your own sound settings for each source.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [EASY EQ].
[62.5HZ] [LEVEL]
[BASS EXTEND] [ON]: Turns on the extended bass. ; [OFF]: Cancels.
[100HZ]/[160HZ]/ Adjusts the level to memorize for each source.
[250HZ]/[400HZ]/ (Before making an adjustment, select the source you want to adjust.)
[630HZ]/[1KHZ]/ [100HZ]: [LEVEL –9] to [LEVEL +9]
[1.6KHZ]/[2.5KHZ]/ [160HZ]: [LEVEL –9] to [LEVEL +9]
[4KHZ]/[6.3KHZ]/ [250HZ]: [LEVEL –9] to [LEVEL +9]
[10KHZ]/[16KHZ] [400HZ]: [LEVEL –9] to [LEVEL +9]
[630HZ]: [LEVEL –9] to [LEVEL +9]
[1KHZ]: [LEVEL –9] to [LEVEL +9]
[1.6KHZ]: [LEVEL –9] to [LEVEL +9]
[2.5KHZ]: [LEVEL –9] to [LEVEL +9]
[4KHZ]: [LEVEL –9] to [LEVEL +9]
[6.3KHZ]: [LEVEL –9] to [LEVEL +9]
[10KHZ]: [LEVEL –9] to [LEVEL +9]
[16KHZ]: [LEVEL –9] to [LEVEL +9]
[Q FACTOR] [1.35]/[1.50]/[2.00]: Adjusts the quality factor.
[PRESET EQ] [NATURAL]/[ROCK]/[POPS]/[EASY]/[TOP40]/[JAZZ]/[POWERFUL]/
[USER]: Selects a preset equalizer suitable to the music genre.
(Select [USER] to use the settings made in [EASY EQ] or
[MANUAL EQ].)
[BASS BOOST] [LV1] to [LV5]: Selects your preferred bass boost level. ; [OFF]: Cancels.
[LOUDNESS] [LV1]/[LV2]: Selects your preferred low or high frequencies boost to
produce a well-balanced sound at low volume. ; [OFF]: Cancels.
[SUBWOOFER SET] [ON]: Turns on the subwoofer output. ; [OFF]: Cancels.
[LEVEL –9] to [LEVEL +9] ([LEVEL +5]): Adjusts
the level to memorize for each source.
(Before making an adjustment, select the source
you want to adjust.)
(Default: [LEVEL +1]
[LEVEL 0]
[LEVEL -1]
[LEVEL -2]
[LEVEL -3]
[LEVEL -6]
[LEVEL -3]
[LEVEL -2]
[LEVEL -4]
[LEVEL +4]
[LEVEL +3]
[LEVEL +7])
[FADER] (Not applicable if 3-way crossover is selected.)
[R15] to [F15] ([0]): Adjusts the front and rear speaker output balance.
[BALANCE] [L15] to [R15] ([0]): Adjusts the left and right speaker output balance.
[VOLUME OFFSET] [–15] to [+6] ([0]): Presets the initial volume level of each source by
comparing to the FM volume level.
(Before adjustment, select the source you want to adjust.)
[SOUND EFFECT]
[SOUND RECNSTR] (Not applicable for RADIO source, DIGITAL AUDIO source and AUX
(Sound source.)
reconstruction) [ON]: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression. ; [OFF]: Cancels.
[SPACE ENHANCE] (Not applicable for RADIO source and DIGITAL AUDIO source.)
[SML]/[MED]/[LRG]: Virtually enhances the sound space. ;
[OFF]: Cancels.
[SND REALIZER] [LV1]/[LV2]/[LV3]: Virtually makes the sound more realistic. ;
[OFF]: Cancels.
[STAGE EQ] [LOW]/[MID]/[HI]: Virtually adjusts the sound position heard from the
speakers. ; [OFF]: Cancels.
[DRIVE EQ] [ON]: Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres. ; [OFF]: Cancels.
[SPEAKER SIZE] Depending on the crossover type you have selected (see "Change the
crossover type" on page 6), 2-way crossover or 3-way crossover
setting items will be shown. (See "Crossover settings" on page 26.)
[X ' OVER]
By default, 2-way crossover type is selected.
[DTA SETTINGS]
For settings, see "Digital Time Alignment settings" on page 27.
[CAR SETTINGS]
• [SUB-W LEVEL] is selectable only when [SUBWOOFER SET] is set to [ON].
25
ENGLISH