Kubota BX2370 Workshop Manual page 413

BX1870,BX2370,BX2670,LA203A,LA243A,RCK48(P),RCK54(P),RCK60B,RCK60D,RCK54D, WSM
Bucket Cylinder
CAUTION
To avoid personal injury:
• Before you disconnect hydraulic hoses, be sure to release
all pressure.
1. Disconnect the hydraulic hoses from the bucket cylinder.
2. Remove lower pin and upper pin and remove the bucket
cylinder (1).
(When reassembling)
• To install the bucket cylinder (1), the hydraulic port must point
inside and be careful of the direction of grease fittings.
IMPORTANT
• When fixing the pin with the bolt (2) and nut (3), do not
tighten the nut completely. The clearance: "A" between the
boss and the nut must be 2 to 3 threads.
(1) Bucket Cylinder
(2) Bolt
Boom Cylinder and Hydraulic Tubes
1. Disconnect the hydraulic hoses from the boom cylinders (4).
2. Remove the pins (2) and remove the boom cylinders (4).
3. Disconnect the hydraulic hoses (6) with quick couplers at the
control valve.
4. Remove the pins (1) and remove the boom (3) from the side
frame (5).
5. Remove the hydraulic tubes (7) from the boom (3).
(When reassembling)
• To install the boom cylinders (4), the hydraulic port must point
inside and be careful of the direction of grease fittings.
(1) Pin
(2) Pin
(3) Boom
(4) Boom Cylinder
8-S7
FRONT LOADER
(3) Nut
9Y1210855FLS0018US0
(5) Side Frame
(6) Hydraulic Hose
(7) Hydraulic Tube
9Y1210855FLS0008US0
KiSC issued 02, 2017 A