Kubota BX2370 Workshop Manual page 229

BX1870,BX2370,BX2670,LA203A,LA243A,RCK48(P),RCK54(P),RCK60B,RCK60D,RCK54D, WSM
Rear Axle Case (RH)
1. Remove the rear axle case (RH) mounting bolts.
2. Remove the rear axle case (RH) (1) as an assembly from the
transaxle case.
NOTE
• Since the adjusting shims are installed behind the 37T
spiral bevel gear, check the shims.
3. Remove the 37T spiral bevel gear (2).
4. Remove the 10T final gear shaft (3).
5. Remove the 66T final gear with the differential lock shift fork.
(When reassembling)
• Apply liquid gasket (Three Bond 1208D or equivalent) to the
joint surface of transaxle case to the rear axle (RH) case.
Rear axle case (RH)
Tightening torque
mounting bolt (M8)
(1) Rear Axle Case (RH)
(2) 37T Spiral Bevel Gear
2-S34
TRANSAXLE
18 to 20 N·m
1.8 to 2.1 kgf·m
13 to 15 lbf·ft
(3) 10T Final Gear Shaft (Brake Shaft)
(4) 66T Final Gear
9Y1210855TXS0046US0
KiSC issued 02, 2017 A