Display Controller (Figure 5-12) - BOMBARDIER LEARJET 40 Pilot's Manual

The display controller buttons are as follows:
1. IN/HPA — Inches of mercury or hectopascals.
2. CUE — Selection of single cue or cross pointer command bars.
3. FPA — Controls selection and deselection of the flight path
angle symbol and flight path acceleration display.
4. WX — Select or deselect weather radar display on the PFD.
5. HSI — Provides up to three different display options on the
HSI.
6. FMS — Allows a navigation display of FMS information (alter-
nately FMS 1 or FMS 2 if dual) to be selected for display on the
PFD.
7. NAV — Alternately selects NAV 1 or NAV 2 as the source of
NAV data on the HSI.
In
hPa
BRG
Each controller contains two rotary bearing source selector knobs that
are used to assign the respective bearing pointers on the HSI or ARC
displays to a particular navigation source.
Power for the display controllers, and the IC-600s, are from the left and
right essential buses and are labeled IC/SG 1 and IC/SG 2 on the pilot's
and copilot's circuit breaker panels in the INSTRUMENT/INDICA-
TIONS group, respectively.
PM-132A
CUE FPA WX
FMS
PUSH
ADF
TO
TEST
NAV
OFF
DIM
OUTBD
INBD
DU DU
DISPLAY CONTROLLER
Figure 5-12
Pilot's Manual
HSI FMS NAV
FMS
ADF
NAV
OFF
BRG
5-47