Primary Flight Display And Bezel Controller (Figure 5-10); Bezel Controllers - BOMBARDIER LEARJET 40 Pilot's Manual

Pilot's Manual
PRIMARY FLIGHT DISPLAY AND BEZEL CONTROLLER
Figure 5-10

BEZEL CONTROLLERS

Many of the display control functions are controlled by the DU bezel
controllers and by the menus displayed on the MFD and EICAS dis-
plays. The PFDs both use the BL-870 bezel controller located at the bot-
tom of the PFDs. Each has two push buttons and two rotary knobs
(Figure 5-10). The push buttons and rotary knobs have functions dedi-
cated to decision height, minimum descent altitude and barometric cor-
rection.
The MFD and EICAS displays use the BL-871 bezel controllers which
have six push buttons, menu keys, and a rotary knob for menu manip-
ulation. The push buttons allow selection of functions displayed in the
menus on the MFD. There are three functions that the MFD bezel push
button provide - (1) selection of a submenu, (2) toggling the selection of
a menu item and (3) selection of a variable parameter for setting. The
MFD rotary knob is dedicated to the control of the map/plan range.
5-43
PM-132A