Advertisement
Tools Required: Allen Wrench (provided), Open Wrench (provided) and Phillips
Note: Please do not fully tighten all bolts until you finish assembling all parts, then go
back and fully tighten all bolts, this will make it easier during assembly of unit.
1. Unpack the unit and confirm that you have all the hardware and required parts listed.
2. Locate the Spine (D) and set back face down on a scratch free surface as shown in
detail #1.
3. Align the "U" shape plate holes of Top and Bottom Shelf Frames (A & C) with the
threaded inserts on the Spine (D) in place, attach with 5/8" Bolts (1) and Lock
Washers & Flat Washers (3 & 4), six bolts per shelf frame. See detail #1.
Parts Provided
A- Top Shelf Frame
C- Bottom Shelf Frame
D- Spine
(1) - 5/8" Bolt
(3) - Lock Washer
(4) – Flat Washer
Please call for replacement parts or assistance:
Screwdriver.
Assembly Instructions
Qty
(1)
(1)
(1)
(12)
(12)
(12)
VAS Furniture Mfg., Inc.
Factory No. 33-10944
Page # 5
Tools Required
Allen Wrench
1-866-942-5362
Advertisement
